LMK212ABJ475MG-T [TAIYO YUDEN]
CAP CER 4.7UF 10V X5R 0805;型号: | LMK212ABJ475MG-T |
厂家: | TAIYO YUDEN (U.S.A.), INC |
描述: | CAP CER 4.7UF 10V X5R 0805 |
文件: | 总52页 (文件大小:844K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
for General Electronic Equipment
Notice for TAIYO YUDEN products
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product Information in this Catalog
(4) Power generation control equipment (nuclear power,
hydroelectric power, thermal power plant control system, etc.)
(5) Undersea equipment (submarine repeating equipment,
underwater work equipment, etc.)
(6) Military equipment
(7) Any other equipment requiring extremely high levels of safety
and/or reliability equal to the equipment listed above
Product information in this catalog is as of January2021.Allofthe
contents specified herein and production status of the products listed in
this catalog are subject to change without notice due to technical
improvement of our products, etc. Therefore, please check for the latest
information carefully before practical application or use of our products.
Please note that TAIYO YUDEN shall not be in any way responsible
for any damages and defects in products or equipment incorporating
our products, which are caused under the conditions other than those
specified in this catalog or individual product specification sheets.
*Notes:
1. There is a possibility that our products can be used only
for aviation equipment that does not directly affect the safe
operation of aircraft (e.g., in-flight entertainment, cabin
light, electric seat, cooking equipment) if such use meets
requirements specified separately by TAIYO YUDEN. Please
be sure to contact TAIYO YUDEN for further information
before using our products for such aviation equipment.
2. Implantable medical devices contain not only internal unit
which is implanted in a body, but also external unit which is
connected to the internal unit.
Approval of Product Specifications
■
Please contact TAIYO YUDEN for further details of product
specifications as the individual product specification sheets are
available. When using our products, please be sure to approve our
product specifications or make a written agreement on the product
specification with TAIYO YUDEN in advance.
Pre-Evaluation in the Actual Equipment and Conditions
Please conduct validation and verification of our products in actual
conditions of mounting and operating environment before using our
products.
4. Limitation of Liability
■
■
Please note that unless you obtain prior written consent of TAIYO
YUDEN, TAIYO YUDEN shall not be in any way responsible for
any damages incurred by you or third parties arising from use of
the products listed in this catalog for any equipment that is not
intended for use by TAIYO YUDEN, or any equipment requiring
inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN
as described above.
Limited Application
1. Equipment Intended for Use
The products listed in this catalog are intended for general-
purpose and standard use in general electronic equipment (e.g.,
AV equipment, OA equipment, home electric appliances, office
equipment, information and communication equipment including,
without limitation, mobile phone, and PC) and other equipment
specified in this catalog or the individual product specification sheets.
Safety Design
■
When using our products for high safety and/or reliability-required
equipment or circuits, please fully perform safety and/or reliability
evaluation. In addition, please install (i) systems equipped with
a protection circuit and a protection device and/or (ii) systems
equipped with a redundant circuit or other system to prevent an
unsafe status in the event of a single fault for a failsafe design to
ensure safety.
TAIYO YUDEN has the line-up of the products intended for
use in automotive electronic equipment, telecommunications
infrastructure and industrial equipment, or medical devices
classified as GHTF Classes A to C (Japan Classes I to III).
Therefore, when using our products for these equipment,
please check available applications specified in this catalog
or the individual product specification sheets and use the
corresponding products.
Intellectual Property Rights
■
■
Information contained in this catalog is intended to convey examples
of typical performances and/or applications of our products and is
not intended to make any warranty with respect to the intellectual
property rights or any other related rights of TAIYO YUDEN or any
third parties nor grant any license under such rights.
2. Equipment Requiring Inquiry
Please be sure to contact TAIYO YUDEN for further information
before using the products listed in this catalog for the following
equipment (excluding intended equipment as specified in this
catalog or the individual product specification sheets) which may
cause loss of human life, bodily injury, serious property damage
and/or serious public impact due to a failure or defect of the
products and/or malfunction attributed thereto.
(1) Transportation equipment (automotive powertrain control
system, train control system, and ship control system, etc.)
(2) Traffic signal equipment
Limited Warranty
Please note that the scope of warranty for our products is limited to
the delivered our products themselves and TAIYO YUDEN shall not
be in any way responsible for any damages resulting from a failure
or defect in our products. Notwithstanding the foregoing, if there is
a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company,
TAIYO YUDEN will warrant our products in accordance with such
agreement.
(3) Disaster prevention equipment, crime prevention equipment
(4) Medical devices classified as GHTF Class C (Japan Class III)
(5) Highly public information network equipment, data-
processing equipment (telephone exchange, and base
station, etc.)
TAIYO YUDEN’s Official Sales Channel
■
■
The contents of this catalog are applicable to our products which are
purchased from our sales offices or authorized distributors (hereinafter
“TAIYO YUDEN’s official sales channel”). Please note that the contents
of this catalog are not applicable to our products purchased from any
seller other than TAIYO YUDEN’s official sales channel.
(6) Any other equipment requiring high levels of quality and/or
reliability equal to the equipment listed above
3. Equipment Prohibited for Use
Caution for Export
Please do not incorporate our products into the following
equipment requiring extremely high levels of safety and/or
reliability.
Some of our products listed in this catalog may require specific
procedures for export according to“U.S. Export Administration
Regulations”,“Foreign Exchange and Foreign Trade Control Law”
of Japan, and other applicable regulations. Should you have any
questions on this matter, please contact our sales staff.
(1) Aerospace equipment (artificial satellite, rocket, etc.)
(2) Aviation equipment *1
(3) Medical devices classified as GHTF Class D (Japan Class IV),
implantable medical devices *2
▶This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
2
for General Electronic Equipment
MULTILAYER CERAMIC CAPACITORS
WAVE REFLOW
■PARTS NUMBER
△=Blank space
J
M
K
3
1
6
△
⑤
B
J
1
0
6
M
L
-
⑩
T
△
⑫
①
②
③
④
⑥
⑦
⑧
⑨
⑪
①Rated voltage
③End termination
Code
P
Rated voltage[VDC]
Code
End termination
Plated
2.5
4
K
S
A
Cu Internal Electrodes (For High Frequency)
J
6.3
10
④Dimension(L×W)
Type
L
Dimensions
EIA(inch)
E
16
(L×W)[mm]
T
25
021
042
063
0.25× 0.125
0.4 × 0.2
008004
01005
0201
0402
0204
0603
0306
0805
0508
1206
1210
1812
G
U
35
50
0.6 × 0.3
H
100
250
630
2000
1.0 × 0.5
Q
S
105
107
212
0.52× 1.0 ※
1.6 × 0.8
X
0.8 × 1.6 ※
2.0 × 1.25
1.25× 2.0 ※
3.2 × 1.6
②Series name
Code
M
Series name
316
325
432
Multilayer ceramic capacitor
3.2 × 2.5
V
Multilayer ceramic capacitor for high frequency
LW reverse type multilayer capacitor
4.5 × 3.2
W
Note : ※LW reverse type(□WK) only
⑤Dimension tolerance
Code
△
Type
ALL
063
105
107
L[mm]
W[mm]
T[mm]
Standard
Standard
Standard
0.6±0.05
1.0±0.10
0.3±0.05
0.3±0.05
0.5±0.10
0.5±0.10
1.6+0.15/-0.05
0.8+0.15/-0.05
0.8+0.15/-0.05
0.45±0.05
A
212
2.0+0.15/-0.05
1.25+0.15/-0.05
1.6±0.20
0.85±0.10
1.25+0.15/-0.05
0.85±0.10
316
3.2±0.20
1.6±0.20
325
063
105
3.2±0.30
2.5±0.30
2.5±0.30
0.6±0.09
0.3±0.09
0.3±0.09
1.0+0.15/-0.05
0.5+0.15/-0.05
0.5+0.15/-0.05
0.45±0.05
107
1.6+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
0.45±0.05
B
212
2.0+0.20/-0
1.25+0.20/-0
0.85±0.10
1.25+0.20/-0
1.6±0.30
316
105
063
105
3.2±0.30
1.6±0.30
C
E
1.0+0.20/-0
0.6 + 0.25/- 0
1.0+0.30/-0
0.5+0.20/-0
0.3 + 0.25/- 0
0.5+0.30/-0
0.5+0.20/-0
0.3 + 0.25/ - 0
0.5+0.30/-0
Note: cf. STANDARD EXTERNAL DIMENSIONS
△= Blank space
⑥Temperature characteristics code
■High dielectric type(Excluding Super low distortion multilayer ceramic capacitor)
Applicable
standard
Temperature
range[℃]
Capacitance
tolerance
±10%
±20%
±10%
±20%
±10%
±20%
±10%
±20%
±10%
±20%
±10%
Tolerance
Code
Ref. Temp.[℃]
Capacitance change
±10%
code
K
JIS
B
-25~+ 85
-55~+ 85
-55~+125
-55~+105
-55~+125
-55~+ 85
20
25
25
25
25
M
K
BJ
EIA
EIA
EIA
EIA
EIA
X5R
X7R
X6S
X7S
X5R
±15%
M
K
B7
C6
±15%
M
K
±22%
M
K
C7
±22%
M
K
LD(※)
25
±15%
M
±20%
Note : ※.LD Low distortion high value multilayer ceramic capacitor
△= Blank space
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
4
for General Electronic Equipment
■Temperature compensating type
Applicable
Temperature
range[℃]
Capacitance
tolerance
±0.05pF
±0.1pF
±0.25pF
±0.5pF
±5%
Tolerance
Code
Ref. Temp.[℃]
Capacitance change
standard
code
A
B
CG
EIA
C0G
-55~+125
25
0±30ppm/℃
C
D
J
±0.25pF
±0.5pF
±5%
C
JIS
UJ
20
UJ
UK
-55~+125
-750±120ppm/℃
-750±250ppm/℃
D
EIA
JIS
EIA
U2J
UK
25
20
25
J
-55~+125
-55~+125
±0.25pF
C
U2K
⑥Series code
⑨Thickness
・Super low distortion multilayer ceramic capacitor
Code
K
Thickness[mm]
Code
SD
Series code
Standard
0.125
0.13
0.18
H
E
・Medium-High Voltage Multilayer Ceramic Capacitor
C
D
P
0.2
Code
SD
Series code
Standard
0.3
0.45(107type or more)
0.5
T
⑦Nominal capacitance
K
Code
V
Nominal capacitance
(example)
W
A
0R5
0.5pF
1pF
0.8
010
D
F
0.85(212type or more)
100
10pF
1.15
1.25
1.6
101
100pF
1,000pF
10,000pF
G
L
102
103
N
1.9
104
0.1
1.0
μ
F
F
F
Y
2.0 max
2.5
105
μ
M
106
10
μ
107
100
μF
⑩Special code
Note : R=Decimal point
Code
-
Special code
Standard
⑧Capacitance tolerance
Code
A
Capacitance tolerance
±0.05pF
±0.1pF
⑪Packaging
Code
Packaging
B
F
T
φ178mm Taping (2mm pitch)
φ178mm Taping (4mm pitch)
C
±0.25pF
±0.5pF
D
φ178mm Taping (4mm pitch, 1000 pcs/reel)
325 type(Thickness code M)
P
F
±1pF
G
±2%
φ178mm Taping (2mm pitch)105type only
(Thickness code E,H)
R
J
±5%
K
±10%
W
φ178mm Taping(1mm pitch)021/042type only
M
Z
±20%
+80/-20%
⑫Internal code
Code
△
Internal code
Standard
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
5
for General Electronic Equipment
■STANDARD EXTERNAL DIMENSIONS
Dimension [mm]
T
W
Type( EIA )
L
W
*1
K
K
C
D
C
P
T
H
E
e
L
□MK021(008004)
0.25±0.013
0.25±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.0675±0.0275
0.0675±0.0275
□VS021(008004)
T
□MK042(01005)
e
□VS042(01005)
0.4±0.02
0.4±0.02
0.6±0.03
0.2±0.02
0.2±0.02
0.3±0.03
0.2±0.02
0.2±0.02
0.3±0.03
0.1±0.03
0.1±0.03
0.15±0.05
□MK063(0201)
0.13±0.02
0.18±0.02
0.2±0.02
L
□MK105(0402)
1.0±0.05
0.5±0.05
C
P
V
W
P
K
A
V
K
D
G
D
D
F
0.25±0.10
W
0.3±0.03
0.5±0.05
□VK105(0402)
1.0±0.05
0.5±0.05
1.0±0.05
0.5±0.05
0.25±0.10
0.18±0.08
□WK105(0204)※
0.52±0.05
0.3±0.05
0.45±0.05
0.8±0.10
T
□MK107(0603)
1.6±0.10
0.8±0.10
0.8±0.10
1.6±0.10
0.35±0.25
0.25±0.15
□WK107(0306)※
0.5±0.05
e
0.45±0.05
0.85±0.10
1.25±0.10
0.85±0.10
0.85±0.10
1.15±0.10
1.6±0.20
□MK212(0805)
□WK212(0508)※
□MK316(1206)
2.0±0.10
1.25±0.15
3.2±0.15
1.25±0.10
2.0±0.15
1.6±0.15
0.5±0.25
0.3±0.2
※ LW reverse type
0.5+0.35/-0.25
L
0.85±0.10
1.15±0.10
1.9±0.20
D
F
□MK325(1210)
□MK432(1812)
3.2±0.30
4.5±0.40
2.5±0.20
3.2±0.30
N
Y
M
Y
M
0.6±0.3
1.9+0.1/-0.2
2.5±0.20
2.0+0/-0.30
2.5±0.20
0.6±0.4
0.9±0.6
Note : ※. LW reverse type, *1.Thickness code
■STANDARD QUANTITY
Dimension
Standard quantity[pcs]
Type
021
EIA(inch)
[mm]
0.125
Code
K
Paper tape
-
Embossed tape
50000
008004
01005
C
D
P
042
0.2
0.3
-
40000
-
063
105
0201
15000
T
0.13
0.18
0.2
H
E
-
20000
15000
-
-
C
P
20000
15000
0402
0.3
-
V
W
P
0.5
10000
-
0204 ※
0603
0.30
0.45
0.8
K
4000
-
-
4000
-
107
212
316
A
V
K
0306 ※
0.50
0.45
0.85
1.25
0.85
0.85
1.15
1.6
4000
0805
D
G
D
D
F
-
4000
4000
-
3000
-
0508 ※
1206
-
3000
2000
L
-
0.85
1.15
1.9
D
F
-
2000
325
432
1210
1812
N
Y
2.0 max
2.5
M
Y
-
-
-
1000
1000
500
2.0 max
2.5
M
Note : ※.LW Reverse type(□WK)
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
6
for General Electronic Equipment
■PARTS NUMBER
・ All the Multilayer Ceramic Capacitors of the catalog lineup are RoHS Compliant.
・ Capacitance tolerance code is applied to [] of part number.
Note)
*1 We may provide X7R/X7S for some items according to the individual specification.
*2 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact TAIYO YUDEN sales channels.
*3 The size standard should look at ④Dimension, ⑤Dimension tolerance, and ⑨Thickness, and STANDARD EXTERNAL DIMENSIONS.
Multilayer Ceramic Capacitors (High dielectric type)
●021TYPE
【Temperature Characteristic BJ : X5R(-55~+85℃)】ꢀ0.125mm thickness(K)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
EMK021 BJ221[]K-W
EMK021 BJ471[]K-W
EMK021 BJ102[]K-W
JMK021 BJ222[]K-W
JMK021 BJ472[]K-W
JMK021 BJ103[]K-W
AMK021 BJ223MK-W
X5R
X5R
X5R
X5R
X5R
X5R
X5R
220 p
470 p
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
10
10
10
10
10
10
10
150
150
150
150
150
150
150
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
R
R
R
R
R
R
R
16
1000 p
2200 p
4700 p
0.01 μ
0.022 μ
6.3
4
●042TYPE
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ0.2mm thickness(C)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
EMK042 BJ101[]C-W
EMK042 BJ151[]C-W
EMK042 BJ221[]C-W
EMK042 BJ331[]C-W
EMK042 BJ471[]C-W
EMK042 BJ681[]C-W
EMK042 BJ102[]C-W
EMK042 BJ152[]C-W
EMK042 BJ222[]C-W
EMK042 BJ332[]C-W
EMK042 BJ472[]C-W
EMK042 BJ682[]C-W
EMK042 BJ103[]C-W
LMK042 BJ101[]C-W
LMK042 BJ151[]C-W
LMK042 BJ221[]C-W
LMK042 BJ331[]C-W
LMK042 BJ471[]C-W
LMK042 BJ681[]C-W
LMK042 BJ102[]C-W
LMK042 BJ152[]C-W
LMK042 BJ222[]C-W
LMK042 BJ332[]C-W
LMK042 BJ472[]C-W
LMK042 BJ682[]C-W
LMK042 BJ103[]C-W
JMK042 BJ152[]C-W
JMK042 BJ222[]C-W
JMK042 BJ332[]C-W
JMK042 BJ472[]C-W
JMK042 BJ682[]C-W
JMK042 BJ103[]C-W
JMK042 BJ223[]C-W
JMK042 BJ473[]C-W
JMK042 BJ104[]C-W
AMK042 BJ473[]C-W
AMK042 BJ104[]C-W
X5R
X5R
X5R
X5R
X5R
X5R
100 p
150 p
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
5
5
200
200
200
200
200
200
200
150
150
150
150
150
150
200
200
200
200
200
200
200
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
R
220 p
5
R
330 p
5
R
470 p
5
R
680 p
5
R
16
B
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R
1000 p
1500 p
2200 p
3300 p
4700 p
6800 p
0.01 μ
100 p
5
R
10
10
10
10
10
10
5
R
R
R
R
R
R
R
150 p
5
R
220 p
5
R
330 p
5
R
470 p
5
R
680 p
5
R
10
B
1000 p
1500 p
2200 p
3300 p
4700 p
6800 p
0.01 μ
1500 p
2200 p
3300 p
4700 p
6800 p
0.01 μ
0.022 μ
0.047 μ
0.1 μ
0.047 μ
0.1 μ
5
R
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
R
X5R
R
X5R
R
X5R
R
X5R
R
X5R
R
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R
R
R
R
R
6.3
R
R
R
X5R
R
X5R
R
X5R
R
4
X5R
R
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ0.2mm thickness(C)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
EMK042 B7101[]C-W
EMK042 B7151[]C-W
EMK042 B7221[]C-W
EMK042 B7331[]C-W
EMK042 B7471[]C-W
EMK042 B7681[]C-W
EMK042 B7102[]C-W
LMK042 B7101[]C-W
LMK042 B7151[]C-W
LMK042 B7221[]C-W
LMK042 B7331[]C-W
LMK042 B7471[]C-W
LMK042 B7681[]C-W
LMK042 B7102[]C-W
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
100 p
150 p
220 p
330 p
470 p
680 p
1000 p
100 p
150 p
220 p
330 p
470 p
680 p
1000 p
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
5
5
5
5
5
5
5
5
5
5
5
5
5
5
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
R
R
R
R
R
R
R
R
R
R
R
R
R
R
16
10
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
7
for General Electronic Equipment
■PARTS NUMBER
●063TYPE
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ0.3mm thickness(P)
Soldering
R:Reflow
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
X5R*1
B
UMK063 BJ101[]P-F
UMK063 BJ151[]P-F
UMK063 BJ221[]P-F
UMK063 BJ331[]P-F
UMK063 BJ471[]P-F
UMK063 BJ681[]P-F
UMK063 BJ102[]P-F
UMK063 BJ152[]P-F
UMK063 BJ222[]P-F
UMK063 BJ332[]P-F
UMK063 BJ472[]P-F
UMK063 BJ682[]P-F
UMK063 BJ103[]P-F
GMK063 BJ104[]P-F
TMK063 BJ152[]P-F
TMK063 BJ222[]P-F
TMK063 BJ332[]P-F
TMK063 BJ472[]P-F
TMK063 BJ682[]P-F
TMK063 BJ103[]P-F
TMK063 BJ223[]P-F
TMK063ABJ104[]P-F
EMK063 BJ152[]P-F
EMK063 BJ222[]P-F
EMK063 BJ332[]P-F
EMK063 BJ472[]P-F
EMK063 BJ682[]P-F
EMK063 BJ103[]P-F
EMK063 BJ153[]P-F
EMK063 BJ223[]P-F
EMK063 BJ333[]P-F
EMK063 BJ473[]P-F
EMK063 BJ683[]P-F
EMK063 BJ104[]P-F
EMK063 BJ224[]P-F
EMK063BBJ474[]PLF
LMK063 BJ223[]P-F
LMK063 BJ333[]P-F
LMK063 BJ473[]P-F
LMK063 BJ683[]P-F
LMK063 BJ104[]P-F
LMK063 BJ224[]P-F
LMK063BBJ474[]PLF
LMK063BBJ105MPLF
JMK063 BJ104[]P-F
JMK063 BJ224[]P-F
JMK063 BJ334MP-F
JMK063 BJ474[]P-F
JMK063ABJ105[]P-F
AMK063EBJ475MP-F
PMK063EBJ475MP-F
100 p
150 p
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
5
200
200
200
200
200
200
200
200
200
200
200
200
200
150
200
200
200
200
200
200
200
150
200
200
200
200
200
200
200
200
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.05
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.09
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.09
0.3±0.09
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.05
0.3+0.25/-0
0.3+0.25/-0
X5R*1
B
X5R*1
B
220 p
X5R*1
B
330 p
X5R*1
B
470 p
X5R*1
B
680 p
X5R*1
50
B
1000 p
1500 p
2200 p
3300 p
4700 p
6800 p
0.01 μ
0.1 μ
B
B
B
B
B
B
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
5
5
5
5
5
35
25
10
5
B
B
B
B
B
B
B
1500 p
2200 p
3300 p
4700 p
6800 p
0.01 μ
0.022 μ
0.1 μ
1500 p
2200 p
3300 p
4700 p
6800 p
0.01 μ
0.015 μ
0.022 μ
0.033 μ
0.047 μ
0.068 μ
0.1 μ
5
5
5
5
5
7.5
10
5
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
B
B
B
B
B
B
5
5
5
5
5
7.5
7.5
7.5
7.5
10
10
10
10
7.5
7.5
7.5
10
10
10
10
10
10
10
10
10
10
10
10
16
B
0.22 μ
0.47 μ
0.022 μ
0.033 μ
0.047 μ
0.068 μ
0.1 μ
B
10
0.22 μ
0.47 μ
1 μ
0.1 μ
±10, ±20
±10, ±20
±20
0.22 μ
0.33 μ
0.47 μ
1 μ
6.3
±10, ±20
±10, ±20
±20
4
4.7 μ
2.5
4.7 μ
±20
【Temperature Characteristic C6 : X6S(-55~+105℃)】ꢀ0.3mm thickness(P)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
TMK063 C6104[]P-F
EMK063AC6104[]P-F
LMK063 C6104[]P-F
LMK063 C6224[]P-F
LMK063BC6474[]PLF
JMK063 C6104[]P-F
JMK063 C6224[]P-F
JMK063BC6474[]P-F
JMK063BC6105MP-F
AMK063 C6474[]P-F
AMK063AC6105[]P-F
25
16
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
0.1 μ
0.1 μ
0.1 μ
0.22 μ
0.47 μ
0.1 μ
0.22 μ
0.47 μ
1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
10
10
10
10
10
10
10
10
10
10
10
150
150
150
150
150
150
150
150
150
150
150
0.3±0.03
0.3±0.05
0.3±0.03
0.3±0.03
0.3±0.09
0.3±0.03
0.3±0.03
0.3±0.09
0.3±0.09
0.3±0.03
0.3±0.05
R
R
R
R
R
R
R
R
R
R
R
10
6.3
4
0.47 μ
1 μ
±10, ±20
±10, ±20
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
8
for General Electronic Equipment
■PARTS NUMBER
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ0.3mm thickness(P)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK063 B7101[]P-F
UMK063 B7151[]P-F
UMK063 B7221[]P-F
UMK063 B7331[]P-F
UMK063 B7471[]P-F
UMK063 B7681[]P-F
UMK063 B7102[]P-F
TMK063 B7152[]P-F
TMK063 B7222[]P-F
TMK063 B7332[]P-F
TMK063 B7472[]P-F
TMK063 B7682[]P-F
TMK063 B7103[]P-F
EMK063 B7152[]P-F
EMK063 B7222[]P-F
EMK063 B7332[]P-F
EMK063 B7472[]P-F
EMK063 B7682[]P-F
EMK063 B7103[]P-F
EMK063 B7223[]P-F
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
100 p
150 p
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
5
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
150
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
220 p
50
25
16
330 p
470 p
680 p
1000 p
1500 p
2200 p
3300 p
4700 p
6800 p
0.01 μ
1500 p
2200 p
3300 p
4700 p
6800 p
0.01 μ
0.022 μ
5
5
5
5
5
5
5
5
5
5
5
7.5
●105TYPE
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ0.5mm thickness(V)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK105 BJ223[]V-F
UMK105 BJ473[]V-F
UMK105 BJ104[]V-F
UMK105 BJ224[]V-F
UMK105ABJ474[]V-F
UMK105CBJ105[]V-F
GMK105 BJ104[]V-F
GMK105ABJ105[]V-F
TMK105 BJ153[]V-F
TMK105 BJ223[]V-F
TMK105 BJ333[]V-F
TMK105 BJ473[]V-F
TMK105 BJ104[]V-F
TMK105 BJ224[]V-F
TMK105ABJ474[]V-F
TMK105 BJ105[]V-F
TMK105CBJ225[]V-F
EMK105 BJ224[]V-F
EMK105ABJ474[]V-F
EMK105 BJ105[]V-F
EMK105ABJ225[]V-F
LMK105 BJ225[]V-F
LMK105BBJ475MVLF
JMK105 BJ225[]V-F
JMK105BBJ475MV-F
JMK105EBJ226MV-F
AMK105EBJ226MV-F
X5R
X5R
X5R
X5R
X5R
X5R
0.022 μ
0.047 μ
0.1 μ
0.22 μ
0.47 μ
1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
5
200
200
150
150
150
150
150
150
200
200
150
150
150
200
200
150
150
150
200
150
150
150
150
150
150
150
150
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.10
0.5+0.20/-0
0.5±0.05
0.5±0.10
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.10
0.5±0.05
0.5+0.20/-0
0.5±0.05
0.5±0.10
0.5±0.05
0.5±0.10
0.5±0.05
0.5+0.15/-0.05
0.5±0.05
0.5+0.15/-0.05
0.5+0.30/-0
0.5+0.30/-0
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
5
10
10
10
10
5
50
35
B
X5R
0.1 μ
1 μ
X5R
10
3.5
3.5
3.5
3.5
5
X5R*1
X5R*1
X5R*1
X5R*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
B
B
B
B
B
0.015 μ
0.022 μ
0.033 μ
0.047 μ
0.1 μ
0.22 μ
0.47 μ
1 μ
25
10
10
10
10
5
2.2 μ
0.22 μ
0.47 μ
1 μ
B
10
10
10
10
10
10
10
20
20
16
10
2.2 μ
2.2 μ
4.7 μ
2.2 μ
4.7 μ
22 μ
±10, ±20
±20
6.3
4
JMK105 BJ475MV-FD
±20
22 μ
±20
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ0.3mm thickness(P)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK105 BJ104[]P-F
TMK105 BJ103[]P-F
TMK105 BJ104[]P-F
TMK105 BJ224[]P-F
TMK105 BJ474[]P-F
EMK105 BJ474[]P-F
LMK105 BJ105[]PLF
JMK105 BJ105[]P-F
AMK105 BJ225MP-F
50
X5R
0.1 μ
0.01 μ
0.1 μ
0.22 μ
0.47 μ
0.47 μ
1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
10
5
150
150
150
150
150
150
150
150
150
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
R
B
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
10
10
10
10
10
10
10
25
16
10
6.3
4
1 μ
2.2 μ
【Temperature Characteristic BJ : X5R(-55~+85℃)】ꢀ0.2mm thickness(C)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
LMK105 BJ104[]C-F
JMK105 BJ224[]C-F
JMK105 BJ474[]C-F
JMK105 BJ105MC-F
10
X5R
X5R
X5R
X5R
0.1 μ
0.22 μ
0.47 μ
1 μ
±10, ±20
±10, ±20
±10, ±20
±20
10
10
10
10
150
150
150
150
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
R
R
R
R
6.3
【Temperature Characteristic BJ : X5R(-55~+85℃)】ꢀ0.18mm thickness(E)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
LMK105 BJ104[]E-R
JMK105 BJ224[]E-R
JMK105 BJ474[]E-R
AMK105 BJ105ME-R
10
6.3
4
X5R
X5R
X5R
X5R
0.1 μ
0.22 μ
0.47 μ
1 μ
±10, ±20
±10, ±20
±10, ±20
±20
10
10
10
10
150
150
150
150
0.18±0.02
0.18±0.02
0.18±0.02
0.18±0.02
R
R
R
R
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
9
for General Electronic Equipment
■PARTS NUMBER
【Temperature Characteristic BJ : X5R(-55~+85℃)】ꢀ0.13mm thickness(H)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
LMK105 BJ104MH-R
JMK105 BJ224MH-R
AMK105 BJ474MH-R
10
6.3
4
X5R
X5R
X5R
0.1 μ
0.22 μ
0.47 μ
±20
±20
±20
10
10
10
150
150
150
0.13±0.02
0.13±0.02
0.13±0.02
R
R
R
【Temperature Characteristic C6 : X6S(-55~+105℃)】ꢀ0.5mm thickness(V)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
GMK105CC6105MV-F
TMK105AC6105[]V-F
EMK105 C6105[]V-F
EMK105CC6225[]V-F
LMK105 C6105[]V-F
LMK105AC6225[]V-F
JMK105 C6105[]V-F
JMK105 C6225[]V-F
JMK105BC6475MV-F
AMK105BC6475MV-F
35
25
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
1 μ
1 μ
±20
10
10
10
10
10
10
10
10
10
10
150
150
150
150
200
150
150
150
150
200
0.5+0.20/-0
0.5±0.10
R
R
R
R
R
R
R
R
R
R
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
1 μ
0.5±0.05
16
10
2.2 μ
1 μ
0.5+0.20/-0
0.5±0.05
2.2 μ
1 μ
0.5±0.10
0.5±0.05
6.3
4
2.2 μ
4.7 μ
4.7 μ
0.5±0.05
0.5+0.15/-0.05
0.5+0.15/-0.05
±20
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ0.5mm thickness(V)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK105 B7152[]V-F
UMK105 B7222[]V-F
UMK105 B7332[]V-F
UMK105 B7472[]V-F
UMK105 B7682[]V-F
UMK105 B7103[]V-F
UMK105 B7223[]V-FR
UMK105 B7473[]V-FR
UMK105 B7104[]V-FR
TMK105 B7223[]V-F
TMK105 B7473[]V-F
TMK105 B7104[]V-FR
TMK105 B7224[]V-FR
EMK105 B7223[]V-F
EMK105 B7473[]V-F
EMK105 B7104[]V-F
EMK105 B7224[]V-FR
LMK105 B7224[]V-FR
LMK105 B7474[]V-F
JMK105 B7224[]V-F
JMK105 B7474[]V-F
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
1500 p
2200 p
3300 p
4700 p
6800 p
0.01 μ
0.022 μ
0.047 μ
0.1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
2.5
2.5
2.5
3.5
10
10
10
3.5
3.5
10
10
3.5
3.5
5
200
200
200
150
150
150
200
200
150
150
150
200
150
200
200
150
150
150
150
150
150
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
50
0.022 μ
0.047 μ
0.1 μ
25
16
0.22 μ
0.022 μ
0.047 μ
0.1 μ
0.22 μ
0.22 μ
0.47 μ
0.22 μ
0.47 μ
10
10
10
5
10
6.3
10
●107TYPE
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ0.8mm thickness(A)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK107ABJ474[]A-T
UMK107 BJ105[]A-T
UMK107BBJ225[]A-T
GMK107BBJ475[]A-T
TMK107ABJ225[]A-T
TMK107BBJ475[]A-T
TMK107BBJ106MA-T
EMK107ABJ475[]A-T
EMK107BBJ106MA-T
LMK107BBJ106[]ALT
LMK107BBJ226MA-T
JMK107ABJ106[]A-T
JMK107BBJ226MA-T
JMK107BBJ476MA-RE
AMK107BBJ476MA-RE
UMK107 BJ474[]A-TD
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
0.47 μ
1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
10
10
10
10
10
10
10
10
10
10
10
10
10
15
20
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
0.8+0.15/-0.05
0.8±0.10
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
50
35
25
2.2 μ
4.7 μ
2.2 μ
4.7 μ
10 μ
4.7 μ
10 μ
10 μ
22 μ
10 μ
22 μ
47 μ
47 μ
0.8+0.20/-0
0.8+0.20/-0
0.8+0.15/-0.05
0.8+0.20/-0
0.8+0.20/-0
0.8+0.15/-0.05
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
0.8+0.15/-0.05
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
TMK107 BJ225[]A-TD
EMK107 BJ475[]A-TD
LMK107 BJ106[]ALTD
JMK107 BJ106[]A-T
±10, ±20
±20
16
10
±10, ±20
±20
±10, ±20
±20
6.3
4
±20
±20
【Temperature Characteristic BJ : X5R(-55~+85℃)】ꢀ0.45mm thickness(K)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
TMK107 BJ105[]K-T
EMK107 BJ105[]K-T
EMK107BBJ225[]K-T
LMK107 BJ105[]K-T
LMK107 BJ225[]K-T
LMK107BBJ475MKLT
JMK107 BJ105[]K-T
JMK107 BJ225[]K-T
JMK107 BJ475MK-T
JMK107BBJ106MK-TT
AMK107BBJ106MK-T*2
25
16
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
1 μ
1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
10
10
10
10
10
10
10
10
10
10
10
150
150
150
150
150
150
150
150
150
150
150
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
R
R
R
R
R
R
R
R
R
R
R
2.2 μ
1 μ
10
2.2 μ
4.7 μ
1 μ
LMK107 BJ475MKLTD
±10, ±20
±10, ±20
±20
2.2 μ
4.7 μ
10 μ
10 μ
6.3
4
±20
±20
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
10
for General Electronic Equipment
■PARTS NUMBER
【Temperature Characteristic C6 : X6S(-55~+105℃)】ꢀ0.8mm thickness(A)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
TMK107BC6225[]A-T
EMK107 C6105[]A-T
EMK107BC6225[]A-T
EMK107BC6475[]A-T
EMK107BC6106MA-T
LMK107 C6105[]A-T
LMK107AC6475[]A-T
LMK107BC6106MA-T
JMK107 C6475[]A-T
JMK107BC6106MA-T
JMK107BC6226MA-T
AMK107BC6226MA-T
AMK107BC6476MA-RE
25
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
2.2 μ
1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
10
5
150
150
150
150
150
150
150
150
150
150
150
150
150
0.8+0.20/-0
0.8±0.10
R
R
R
R
R
R
R
R
R
R
R
R
R
2.2 μ
4.7 μ
10 μ
1 μ
10
10
10
5
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
0.8±0.10
16
±10, ±20
±10, ±20
±20
10
4.7 μ
10 μ
4.7 μ
10 μ
22 μ
22 μ
47 μ
10
10
10
10
10
10
20
0.8+0.15/-0.05
0.8+0.20/-0
0.8±0.10
±10, ±20
±20
6.3
4
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
±20
±20
±20
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ0.8mm thickness(A)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK107 B7224[]A-TR
UMK107 B7474[]A-TR
UMK107AB7105[]A-T
TMK107 B7474[]A-TR
TMK107 B7105[]A-T
EMK107 B7474[]A-T
EMK107 B7105[]A-T
EMK107BB7225[]A-T
LMK107 B7225[]A-TR
JMK107 B7225[]A-TR
JMK107BB7475[]A-T
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.22 μ
0.47 μ
1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
10
10
10
10
10
3.5
5
150
150
150
150
150
150
150
150
150
200
150
0.8±0.10
0.8±0.10
R
R
R
R
R
R
R
R
R
R
R
50
25
16
0.8+0.15/-0.05
0.8±0.10
0.47 μ
1 μ
0.8±0.10
0.47 μ
1 μ
0.8±0.10
0.8±0.10
2.2 μ
2.2 μ
2.2 μ
4.7 μ
10
10
10
10
0.8+0.20/-0
0.8±0.10
10
0.8±0.10
6.3
0.8+0.20/-0
●212TYPE
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ1.25mm thickness(G)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK212BBJ475[]G-T
GMK212BBJ106[]G-T
TMK212ABJ475[]G-T
TMK212BBJ106MG-T
TMK212BBJ226MG-TT
EMK212ABJ106[]G-T
EMK212BBJ226MG-T
LMK212BBJ476MG-T
JMK212BBJ476MG-T
JMK212BBJ107MG-TE
AMK212BBJ107MG-TE
PMK212BBJ107MG-T
50
35
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
4.7 μ
10 μ
4.7 μ
10 μ
22 μ
10 μ
22 μ
47 μ
47 μ
100 μ
100 μ
100 μ
±10, ±20
±10, ±20
±10, ±20
±20
10
10
10
10
10
10
10
10
10
20
20
10
150
150
150
150
150
150
150
150
150
150
150
150
1.25+0.20/-0
1.25+0.20/-0
1.25+0.15/-0.05
1.25+0.20/-0
1.25+0.20/-0
1.25+0.15/-0.05
1.25+0.20/-0
1.25+0.20/-0
1.25+0.20/-0
1.25+0.20/-0
1.25+0.20/-0
1.25+0.20/-0
R
R
R
R
R
R
R
R
R
R
R
R
TMK212 BJ475[]G-T
EMK212 BJ106[]G-T
JMK212 BJ476MG-T
25
±20
±10, ±20
±20
16
10
6.3
±20
±20
±20
4
±20
2.5
±20
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ0.85mm thickness(D)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK212ABJ105[]D-T
UMK212BBJ225[]D-T
GMK212BBJ475[]D-T
TMK212 BJ474[]D-T
TMK212 BJ105[]D-T
TMK212ABJ225[]D-T
TMK212BBJ475[]D-T
TMK212BBJ106[]D-T
EMK212 BJ105[]D-T
EMK212ABJ225[]D-T
EMK212 BJ475[]D-T
EMK212ABJ106[]D-T
LMK212 BJ105[]D-T
LMK212 BJ225[]D-T
LMK212ABJ106[]D-T
LMK212BBJ226MD-T
JMK212ABJ106[]D-T
JMK212ABJ226MD-T
AMK212BBJ476MD-T
UMK212 BJ105[]D-TD
X5R
X5R
X5R
1 μ
2.2 μ
4.7 μ
0.47 μ
1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
10
10
10
3.5
5
150
150
150
200
200
150
150
150
200
200
150
150
200
200
150
150
200
150
150
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
50
35
B
B
X5R
X5R
X5R
X5R
X5R
X5R*1
X5R*1
X5R
25
TMK212 BJ225[]D-T
TMK212 BJ475[]D-TD
2.2 μ
4.7 μ
10 μ
1 μ
5
10
10
5
B
B
EMK212 BJ225[]D-T
EMK212 BJ106[]D-TD
2.2 μ
4.7 μ
10 μ
1 μ
5
16
10
10
10
3.5
5
X5R
X5R*1
X5R*1
X5R
2.2 μ
10 μ
22 μ
10 μ
22 μ
47 μ
LMK212 BJ106[]D-T
10
10
10
10
10
X5R
JMK212 BJ106[]D-T
JMK212 BJ226MD-T
X5R
±10, ±20
±20
6.3
4
X5R
X5R
±20
【Temperature Characteristic C6 : X6S(-55~+105℃)】ꢀ1.25mm thickness(G)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
TMK212BC6106[]G-T
EMK212BC6226MG-TT
LMK212BC6226MG-T
JMK212BC6226MG-T
JMK212BC6476MG-T
AMK212BC6476MG-T
AMK212BC6107MG-TE
25
16
10
X6S
X6S
X6S
X6S
X6S
X6S
X6S
10 μ
22 μ
22 μ
22 μ
47 μ
47 μ
100 μ
±10, ±20
±20
10
10
10
10
10
10
20
150
150
150
150
150
150
150
1.25+0.20/-0
1.25+0.20/-0
1.25+0.20/-0
1.25+0.20/-0
1.25+0.20/-0
1.25+0.20/-0
1.25+0.20/-0
R
R
R
R
R
R
R
±20
±20
6.3
4
±20
±20
±20
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
11
for General Electronic Equipment
■PARTS NUMBER
【Temperature Characteristic C6 : X6S(-55~+105℃)】ꢀ0.85mm thickness(D)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
LMK212AC6106[]D-T
AMK212BC6226MD-T
10
4
X6S
X6S
10 μ
22 μ
±10, ±20
±20
10
10
150
150
0.85±0.10
0.85±0.10
R
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ1.25mm thickness(G)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK212 B7224[]G-T
UMK212 B7474[]G-T
UMK212 B7105[]G-T
UMK212BB7225[]G-T
TMK212 B7225[]G-TR
TMK212AB7475[]G-T
EMK212 B7475[]G-T
EMK212BB7106MG-T
LMK212AB7106[]G-T
JMK212AB7106[]G-T
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.22 μ
0.47 μ
1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
3.5
3.5
10
10
10
10
10
10
10
10
150
150
150
150
150
150
150
150
150
150
1.25±0.10
1.25±0.10
R/W
R/W
R/W
R
50
1.25±0.10
2.2 μ
2.2 μ
4.7 μ
4.7 μ
10 μ
10 μ
10 μ
1.25+0.20/-0
1.25±0.10
R
25
16
TMK212 B7475[]G-T
1.25+0.15/-0.05
1.25±0.10
R
R
1.25+0.20/-0
1.25+0.15/-0.05
1.25+0.15/-0.05
R
LMK212 B7106[]G-TD
JMK212 B7106[]G-T
10
±10, ±20
±10, ±20
R
6.3
R
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ0.85mm thickness(D)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK212AB7104[]D-T
UMK212AB7224[]D-T
UMK212AB7474[]D-T
UMK212AB7105[]D-T
TMK212AB7225[]D-TR
EMK212 B7474[]D-T
EMK212 B7105[]D-T
EMK212AB7225[]D-T
EMK212BB7475[]D-T
LMK212 B7105[]D-T
LMK212AB7225[]D-T
LMK212AB7475[]D-TR
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.1 μ
0.22 μ
0.47 μ
1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
10
10
10
10
10
3.5
5
150
150
150
150
150
200
200
150
150
200
200
150
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
R
R
50
25
16
R
R
2.2 μ
0.47 μ
1 μ
R
R/W
R
EMK212 B7225[]D-T
2.2 μ
4.7 μ
1 μ
5
R
10
3.5
5
R
R
10
LMK212 B7225[]D-T
LMK212 B7475[]D-TR
2.2 μ
4.7 μ
R
10
R
●316TYPE
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ1.6mm thickness(L)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK316 BJ475[]L-T
UMK316BBJ106[]L-T
TMK316BBJ226ML-T
EMK316BBJ476ML-T
LMK316ABJ476ML-T
JMK316ABJ107ML-T
JMK316BBJ227ML-TE
AMK316ABJ107ML-T
AMK316BBJ157ML-T
AMK316BBJ227ML-TE
PMK316BBJ227ML-T
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
4.7 μ
10 μ
±10, ±20
±10, ±20
±20
10
10
10
10
10
10
20
10
10
10
10
150
150
150
150
150
150
150
150
150
150
150
1.6±0.20
1.6±0.30
1.6±0.30
1.6±0.30
1.6±0.20
1.6±0.20
1.6±0.30
1.6±0.20
1.6±0.30
1.6±0.30
1.6±0.30
R
R
R
R
R
R
R
R
R
R
R
50
25
16
10
22 μ
47 μ
±20
LMK316 BJ476ML-T
JMK316 BJ107ML-T
47 μ
±20
100 μ
220 μ
100 μ
150 μ
220 μ
220 μ
±20
6.3
±20
AMK316 BJ107ML-T
±20
4
±20
±20
2.5
±20
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ0.85mm thickness(D)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK316 BJ105[]D-T
UMK316 BJ225[]D-T
UMK316ABJ475[]D-T
TMK316 BJ105[]D-T
TMK316 BJ225[]D-T
TMK316 BJ475[]D-T
TMK316ABJ106[]D-T
EMK316 BJ225[]D-T
EMK316 BJ475[]D-T
EMK316 BJ106[]D-T
EMK316ABJ226MD-T
LMK316 BJ475[]D-T
LMK316 BJ106[]D-T
LMK316ABJ226MD-T
JMK316 BJ106[]D-T
JMK316ABJ226MD-T
JMK316ABJ476MD-T
B
B
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
1 μ
2.2 μ
4.7 μ
1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
3.5
3.5
10
3.5
3.5
5
150
150
150
200
150
150
150
200
200
150
150
200
200
150
200
150
150
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
50
25
UMK316 BJ475[]D-T
B
B
2.2 μ
4.7 μ
10 μ
2.2 μ
4.7 μ
10 μ
22 μ
4.7 μ
10 μ
22 μ
10 μ
22 μ
47 μ
TMK316 BJ106[]D-TD
10
3.5
5
B
B
16
10
10
5
EMK316 BJ226MD-T
LMK316 BJ226MD-T
B
±10, ±20
±10, ±20
±20
10
10
10
10
10
10
±10, ±20
±20
6.3
JMK316 BJ226MD-T
JMK316 BJ476MD-T
±20
【Temperature Characteristic C6 : X6S(-55~+105℃)】ꢀ1.6mm thickness(L)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
EMK316BC6226ML-T
LMK316BC6476ML-T
JMK316AC6476ML-T
AMK316AC6476ML-T
AMK316AC6107ML-T
AMK316BC6227ML-TE
16
10
6.3
X6S
X6S
X6S
X6S
X6S
X6S
22 μ
47 μ
±20
±20
±20
±20
±20
±20
10
10
10
10
10
20
150
150
150
200
150
150
1.6±0.30
1.6±0.30
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.30
R
R
R
R
R
R
47 μ
47 μ
4
100 μ
220 μ
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
12
for General Electronic Equipment
■PARTS NUMBER
【Temperature Characteristic C7 : X7S(-55~+125℃)】ꢀ1.6mm thickness(L)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
JMK316AC7476ML-T
AMK316AC7476ML-T
6.3
4
X7S
X7S
47 μ
47 μ
±20
±20
10
10
150
150
1.6±0.20
1.6±0.20
R
R
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ1.6mm thickness(L)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK316 B7225[]L-T
UMK316AB7475[]L-T
GMK316AB7106[]L-TR
TMK316AB7475[]L-T
TMK316AB7106[]L-T
EMK316 B7475[]L-T
EMK316AB7106[]L-T
EMK316BB7226ML-T
LMK316AB7106[]L-T
LMK316AB7226[]L-TR
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
2.2 μ
4.7 μ
10 μ
4.7 μ
10 μ
4.7 μ
10 μ
22 μ
10 μ
22 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
10
10
10
10
10
5
150
150
150
200
150
200
200
150
200
150
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.30
1.6±0.20
1.6±0.20
R
R
R
R
R
R
R
R
R
R
50
35
25
UMK316 B7475[]L-T
TMK316 B7475[]L-T
TMK316 B7106[]L-TD
16
10
EMK316 B7106[]L-TD
10
10
10
10
LMK316 B7106[]L-TD
LMK316 B7226[]L-TD
±10, ±20
±10, ±20
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ0.85mm thickness(D)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK316 B7225[]D-T
TMK316AB7475[]D-T
LMK316AB7106MD-T
50
25
10
X7R
X7R
X7R
2.2 μ
4.7 μ
10 μ
±10, ±20
±10, ±20
±20
10
10
10
150
150
150
0.85±0.10
0.85±0.10
0.85±0.10
R
R
R
●325TYPE
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ2.5mm thickness(M)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK325 BJ106[]M-P
GMK325 BJ226MM-P
TMK325ABJ476MM-P
EMK325ABJ107MM-P
LMK325 BJ476MM-P
LMK325ABJ107MM-P
JMK325ABJ157MM-P
JMK325ABJ227MM-P
JMK325ABJ337MM-PE
AMK325ABJ157MM-P
AMK325ABJ227MM-P
AMK325ABJ337MM-P
50
35
25
16
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
10 μ
22 μ
±10, ±20
±20
5
150
150
150
150
150
150
150
150
150
150
150
150
2.5±0.20
2.5±0.20
2.5±0.30
2.5±0.30
2.5±0.20
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
R
R
R
R
R
R
R
R
R
R
R
R
5
47 μ
±20
10
10
10
10
10
10
10
10
10
10
100 μ
47 μ
±20
±20
10
LMK325 BJ107MM-P
100 μ
150 μ
220 μ
330 μ
150 μ
220 μ
330 μ
±20
±20
6.3
±20
±20
±20
4
±20
±20
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ1.9mm thickness(Y,N)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK325 BJ475[]N-T
GMK325 BJ225[]N-T
GMK325 BJ475[]N-T
GMK325 BJ106[]N-T
TMK325 BJ335MN-T
TMK325 BJ475[]N-T
TMK325 BJ106[]N-T
EMK325 BJ475[]N-T
EMK325 BJ106[]N-T
EMK325 BJ476MY-T
LMK325 BJ226MY-T
LMK325 BJ106[]N-T
JMK325 BJ226MY-T
JMK325 BJ107MY-T
JMK325 BJ476MN-T
50
35
X5R
4.7 μ
2.2 μ
4.7 μ
10 μ
3.3 μ
4.7 μ
10 μ
4.7 μ
10 μ
47 μ
22 μ
10 μ
22 μ
100 μ
47 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
10
3.5
10
5
150
200
150
150
200
200
200
200
200
150
150
200
200
150
150
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9+0.1/-0.2
1.9+0.1/-0.2
1.9±0.20
1.9+0.1/-0.2
1.9+0.1/-0.2
1.9±0.20
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
B
X5R
X5R
X5R
X5R*1
X5R*1
X5R
X5R*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
B
B
3.5
3.5
5
25
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
B
3.5
3.5
10
5
16
10
6.3
B
B
±20
±10, ±20
±20
3.5
5
±20
10
10
±20
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ0.85mm thickness(D)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
TMK325 BJ106[]D-T
EMK325 BJ106[]D-T
EMK325 BJ226MD-T
LMK325 BJ335[]D-T
LMK325 BJ475[]D-T
LMK325 BJ106[]D-T
25
16
X5R
X5R
X5R
10 μ
10 μ
22 μ
3.3 μ
4.7 μ
10 μ
±10, ±20
±10, ±20
±20
5
5
150
150
150
200
200
150
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
R
R
R
R
R
R
10
3.5
5
B
B
X5R
X5R
X5R
±10, ±20
±10, ±20
±10, ±20
10
5
【Temperature Characteristic C6 : X6S(-55~+105℃)】ꢀ2.5mm thickness(M)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
EMK325AC6476MM-P
LMK325AC6107MM-P
AMK325AC6157MM-P
AMK325AC6227MM-P
AMK325AC6337MM-PE
PMK325AC6337MM-P
16
10
X6S
X6S
X6S
X6S
X6S
X6S
47 μ
100 μ
150 μ
220 μ
330 μ
330 μ
±20
±20
±20
±20
±20
±20
10
10
10
10
10
10
150
150
150
150
150
150
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
R
R
R
R
R
R
4
2.5
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
13
for General Electronic Equipment
■PARTS NUMBER
【Temperature Characteristic C7 : X7S(-55~+125℃)】ꢀ2.5mm thickness(M)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
2.5±0.30
Part number 1
Part number 2
Rated voltage x %
150
JMK325AC7107MM-P
6.3
X7S
100 μ
±20
10
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ2.5mm thickness(M)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK325 B7335[]M-P
UMK325 B7475[]M-P
UMK325AB7106[]M-P
TMK325AB7106[]M-P
TMK325 B7226[]M-PR
EMK325 B7226[]M-PR
LMK325 B7476[]M-PR
JMK325 B7476[]M-PR
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
3.3 μ
4.7 μ
10 μ
10 μ
22 μ
22 μ
47 μ
47 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
5
200
150
150
200
150
150
150
200
2.5±0.20
2.5±0.20
2.5±0.30
2.5±0.30
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
R
R
R
R
R
R
R
R
50
10
10
10
10
10
10
25
16
10
6.3
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ1.9mm thickness(N)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK325 B7475[]N-TR
TMK325 B7335[]N-T
TMK325 B7475[]N-T
TMK325 B7106[]N-TR
EMK325 B7475[]N-T
EMK325 B7106[]N-T
LMK325 B7106[]N-T
50
25
X7R
X7R
X7R
X7R
X7R
X7R
X7R
4.7 μ
3.3 μ
4.7 μ
10 μ
4.7 μ
10 μ
10 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
10
3.5
3.5
10
150
200
150
150
200
150
200
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
R
R
R
R
R
R
R
3.5
3.5
3.5
16
10
●432TYPE
【Temperature Characteristic BJ : X5R(-55~+85℃)】ꢀ2.5mm thickness(M)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
2.5±0.20
Part number 1
Part number 2
Rated voltage x %
150
AMK432 BJ477MM-T
4
X5R
470 μ
±20
10
【Temperature Characteristic C6 : X6S(-55~+105℃)】ꢀ2.5mm thickness(M)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
2.5±0.20
Part number 1
Part number 2
Rated voltage x %
150
PMK432 C6477MM-T
2.5
X6S
470 μ
±20
10
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
14
for General Electronic Equipment
■PARTS NUMBER
Multilayer Ceramic Capacitors(Temperature compensating type)
●021TYPE
【Temperature Characteristic CG : CG/C0G(-55~+125℃)】ꢀ0.125mm thickness(K)
Q
(at 1MHz)
min
404
406
408
410
412
414
415
416
418
420
422
424
426
428
430
432
434
436
438
440
442
444
446
448
450
452
454
456
458
460
462
464
466
468
470
472
474
476
478
480
482
484
486
488
490
492
494
496
498
500
502
504
506
508
510
512
514
516
518
520
522
524
526
528
530
532
534
536
538
540
542
544
546
548
550
552
554
556
558
560
562
564
566
568
570
Soldering
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Thickness*3
Part number 1
Part number 2
Capacitance tolerance
R:Reflow
W:Wave
R
[mm]
Rated voltage x %
TMK021 CG0R2BK-W
TMK021 CG0R3[]K-W
TMK021 CG0R4[]K-W
TMK021 CG0R5[]K-W
TMK021 CG0R6[]K-W
TMK021 CG0R7[]K-W
TMK021 CGR75[]K-W
TMK021 CG0R8[]K-W
TMK021 CG0R9[]K-W
TMK021 CG010[]K-W
TMK021 CG1R1[]K-W
TMK021 CG1R2[]K-W
TMK021 CG1R3[]K-W
TMK021 CG1R4[]K-W
TMK021 CG1R5[]K-W
TMK021 CG1R6[]K-W
TMK021 CG1R7[]K-W
TMK021 CG1R8[]K-W
TMK021 CG1R9[]K-W
TMK021 CG020[]K-W
TMK021 CG2R1[]K-W
TMK021 CG2R2[]K-W
TMK021 CG2R3[]K-W
TMK021 CG2R4[]K-W
TMK021 CG2R5[]K-W
TMK021 CG2R6[]K-W
TMK021 CG2R7[]K-W
TMK021 CG2R8[]K-W
TMK021 CG2R9[]K-W
TMK021 CG030[]K-W
TMK021 CG3R1[]K-W
TMK021 CG3R2[]K-W
TMK021 CG3R3[]K-W
TMK021 CG3R4[]K-W
TMK021 CG3R5[]K-W
TMK021 CG3R6[]K-W
TMK021 CG3R7[]K-W
TMK021 CG3R8[]K-W
TMK021 CG3R9[]K-W
TMK021 CG040[]K-W
TMK021 CG4R1[]K-W
TMK021 CG4R2[]K-W
TMK021 CG4R3[]K-W
TMK021 CG4R4[]K-W
TMK021 CG4R5[]K-W
TMK021 CG4R6[]K-W
TMK021 CG4R7[]K-W
TMK021 CG4R8[]K-W
TMK021 CG4R9[]K-W
TMK021 CG050[]K-W
TMK021 CG5R1[]K-W
TMK021 CG5R2[]K-W
TMK021 CG5R3[]K-W
TMK021 CG5R4[]K-W
TMK021 CG5R5[]K-W
TMK021 CG5R6[]K-W
TMK021 CG5R7[]K-W
TMK021 CG5R8[]K-W
TMK021 CG5R9[]K-W
TMK021 CG060[]K-W
TMK021 CG6R1[]K-W
TMK021 CG6R2[]K-W
TMK021 CG6R3[]K-W
TMK021 CG6R4[]K-W
TMK021 CG6R5[]K-W
TMK021 CG6R6[]K-W
TMK021 CG6R7[]K-W
TMK021 CG6R8[]K-W
TMK021 CG6R9[]K-W
TMK021 CG070[]K-W
TMK021 CG7R1[]K-W
TMK021 CG7R2[]K-W
TMK021 CG7R3[]K-W
TMK021 CG7R4[]K-W
TMK021 CG7R5[]K-W
TMK021 CG7R6[]K-W
TMK021 CG7R7[]K-W
TMK021 CG7R8[]K-W
TMK021 CG7R9[]K-W
TMK021 CG080[]K-W
TMK021 CG8R1[]K-W
TMK021 CG8R2[]K-W
TMK021 CG8R3[]K-W
TMK021 CG8R4[]K-W
TMK021 CG8R5[]K-W
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
0.2 p
0.3 p
0.4 p
0.5 p
0.6 p
0.7 p
0.75 p
0.8 p
0.9 p
1 p
±0.1pF
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
R
R
R
R
R
R
R
R
R
1.1 p
1.2 p
1.3 p
1.4 p
1.5 p
1.6 p
1.7 p
1.8 p
1.9 p
2 p
R
R
R
R
R
R
R
R
R
R
2.1 p
2.2 p
2.3 p
2.4 p
2.5 p
2.6 p
2.7 p
2.8 p
2.9 p
3 p
R
R
R
R
R
R
R
R
R
R
3.1 p
3.2 p
3.3 p
3.4 p
3.5 p
3.6 p
3.7 p
3.8 p
3.9 p
4 p
R
R
R
R
R
R
R
R
R
R
4.1 p
4.2 p
4.3 p
4.4 p
4.5 p
4.6 p
4.7 p
4.8 p
4.9 p
5 p
R
R
25
R
R
R
R
R
R
R
R
5.1 p
5.2 p
5.3 p
5.4 p
5.5 p
5.6 p
5.7 p
5.8 p
5.9 p
6 p
R
R
R
R
R
R
R
R
R
R
6.1 p
6.2 p
6.3 p
6.4 p
6.5 p
6.6 p
6.7 p
6.8 p
6.9 p
7 p
R
R
R
R
R
R
R
R
R
R
7.1 p
7.2 p
7.3 p
7.4 p
7.5 p
7.6 p
7.7 p
7.8 p
7.9 p
8 p
R
R
R
R
R
R
R
R
R
R
8.1 p
8.2 p
8.3 p
8.4 p
8.5 p
R
R
R
R
R
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
15
for General Electronic Equipment
■PARTS NUMBER
Q
(at 1MHz)
min
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Thickness*3 [mm]
Part number 1
Part number 2
Capacitance tolerance
Rated voltage x %
TMK021 CG8R6[]K-W
TMK021 CG8R7[]K-W
TMK021 CG8R8[]K-W
TMK021 CG8R9[]K-W
TMK021 CG090[]K-W
TMK021 CG9R1[]K-W
TMK021 CG9R2[]K-W
TMK021 CG9R3[]K-W
TMK021 CG9R4[]K-W
TMK021 CG9R5[]K-W
TMK021 CG9R6[]K-W
TMK021 CG9R7[]K-W
TMK021 CG9R8[]K-W
TMK021 CG9R9[]K-W
TMK021 CG100DK-W
TMK021 CG120JK-W
TMK021 CG150JK-W
TMK021 CG180JK-W
TMK021 CG220JK-W
TMK021 CG270JK-W
EMK021 CG330JK-W
EMK021 CG390JK-W
EMK021 CG470JK-W
EMK021 CG560JK-W
LMK021 CG680JK-W
LMK021 CG820JK-W
LMK021 CG101JK-W
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
8.6 p
8.7 p
8.8 p
8.9 p
9 p
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.5pF
572
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
150
150
150
150
200
200
200
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
574
576
578
580
9.1 p
9.2 p
9.3 p
9.4 p
9.5 p
9.6 p
9.7 p
9.8 p
9.9 p
10 p
12 p
15 p
18 p
22 p
27 p
33 p
39 p
47 p
56 p
68 p
82 p
100 p
582
584
586
588
590
25
592
594
596
598
600
±5%
640
±5%
700
±5%
760
±5%
840
±5%
940
±5%
1000
1000
1000
1000
1000
1000
1000
±5%
16
10
±5%
±5%
±5%
±5%
±5%
●042TYPE
【Temperature Characteristic CG : CG/C0G(-55~+125℃)】ꢀ0.2mm thickness(C,D)
Q
(at 1MHz)
min
408
410
412
414
415
416
418
420
422
424
426
428
430
432
434
436
438
440
442
444
446
448
450
452
454
456
458
460
462
464
466
468
470
472
474
476
478
480
482
484
486
488
490
492
494
496
498
500
502
504
506
508
510
512
514
516
Soldering
R:Reflow
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Thickness*3 [mm]
Part number 1
Part number 2
Capacitance tolerance
Rated voltage x %
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
TMK042 CG0R4[]D-W
TMK042 CG0R5[]D-W
TMK042 CG0R6[]D-W
TMK042 CG0R7[]D-W
TMK042 CGR75[]D-W
TMK042 CG0R8[]D-W
TMK042 CG0R9[]D-W
TMK042 CG010[]D-W
TMK042 CG1R1[]D-W
TMK042 CG1R2[]D-W
TMK042 CG1R3[]D-W
TMK042 CG1R4[]D-W
TMK042 CG1R5[]D-W
TMK042 CG1R6[]D-W
TMK042 CG1R7[]D-W
TMK042 CG1R8[]D-W
TMK042 CG1R9[]D-W
TMK042 CG020[]D-W
TMK042 CG2R1[]D-W
TMK042 CG2R2[]D-W
TMK042 CG2R3[]D-W
TMK042 CG2R4[]D-W
TMK042 CG2R5[]D-W
TMK042 CG2R6[]D-W
TMK042 CG2R7[]D-W
TMK042 CG2R8[]D-W
TMK042 CG2R9[]D-W
TMK042 CG030[]D-W
TMK042 CG3R1[]D-W
TMK042 CG3R2[]D-W
TMK042 CG3R3[]D-W
TMK042 CG3R4[]D-W
TMK042 CG3R5[]D-W
TMK042 CG3R6[]D-W
TMK042 CG3R7[]D-W
TMK042 CG3R8[]D-W
TMK042 CG3R9[]D-W
TMK042 CG040[]D-W
TMK042 CG4R1[]D-W
TMK042 CG4R2[]D-W
TMK042 CG4R3[]D-W
TMK042 CG4R4[]D-W
TMK042 CG4R5[]D-W
TMK042 CG4R6[]D-W
TMK042 CG4R7[]D-W
TMK042 CG4R8[]D-W
TMK042 CG4R9[]D-W
TMK042 CG050[]D-W
TMK042 CG5R1[]D-W
TMK042 CG5R2[]D-W
TMK042 CG5R3[]D-W
TMK042 CG5R4[]D-W
TMK042 CG5R5[]D-W
TMK042 CG5R6[]D-W
TMK042 CG5R7[]D-W
TMK042 CG5R8[]D-W
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
0.4 p ±0.05pF, ±0.1pF, ±0.25pF
0.5 p ±0.05pF, ±0.1pF, ±0.25pF
0.6 p ±0.05pF, ±0.1pF, ±0.25pF
0.7 p ±0.05pF, ±0.1pF, ±0.25pF
0.75 p ±0.05pF, ±0.1pF, ±0.25pF
0.8 p ±0.05pF, ±0.1pF, ±0.25pF
0.9 p ±0.05pF, ±0.1pF, ±0.25pF
1 p ±0.05pF, ±0.1pF, ±0.25pF
1.1 p ±0.05pF, ±0.1pF, ±0.25pF
1.2 p ±0.05pF, ±0.1pF, ±0.25pF
1.3 p ±0.05pF, ±0.1pF, ±0.25pF
1.4 p ±0.05pF, ±0.1pF, ±0.25pF
1.5 p ±0.05pF, ±0.1pF, ±0.25pF
1.6 p ±0.05pF, ±0.1pF, ±0.25pF
1.7 p ±0.05pF, ±0.1pF, ±0.25pF
1.8 p ±0.05pF, ±0.1pF, ±0.25pF
1.9 p ±0.05pF, ±0.1pF, ±0.25pF
2 p ±0.05pF, ±0.1pF, ±0.25pF
2.1 p ±0.05pF, ±0.1pF, ±0.25pF
2.2 p ±0.05pF, ±0.1pF, ±0.25pF
2.3 p ±0.05pF, ±0.1pF, ±0.25pF
2.4 p ±0.05pF, ±0.1pF, ±0.25pF
2.5 p ±0.05pF, ±0.1pF, ±0.25pF
2.6 p ±0.05pF, ±0.1pF, ±0.25pF
2.7 p ±0.05pF, ±0.1pF, ±0.25pF
2.8 p ±0.05pF, ±0.1pF, ±0.25pF
2.9 p ±0.05pF, ±0.1pF, ±0.25pF
3 p ±0.05pF, ±0.1pF, ±0.25pF
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
25
3.1 p
3.2 p
3.3 p
3.4 p
3.5 p
3.6 p
3.7 p
3.8 p
3.9 p
4 p
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
4.1 p
4.2 p
4.3 p
4.4 p
4.5 p
4.6 p
4.7 p
4.8 p
4.9 p
5 p
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
5.1 p
5.2 p
5.3 p
5.4 p
5.5 p
5.6 p
5.7 p
5.8 p
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
16
for General Electronic Equipment
■PARTS NUMBER
Part number 1
Q
(at 1MHz)
min
Soldering
R:Reflow
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Thickness*3 [mm]
Part number 2
Capacitance tolerance
Rated voltage x %
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
TMK042 CG5R9[]D-W
TMK042 CG060[]D-W
TMK042 CG6R1[]D-W
TMK042 CG6R2[]D-W
TMK042 CG6R3[]D-W
TMK042 CG6R4[]D-W
TMK042 CG6R5[]D-W
TMK042 CG6R6[]D-W
TMK042 CG6R7[]D-W
TMK042 CG6R8[]D-W
TMK042 CG6R9[]D-W
TMK042 CG070[]D-W
TMK042 CG7R1[]D-W
TMK042 CG7R2[]D-W
TMK042 CG7R3[]D-W
TMK042 CG7R4[]D-W
TMK042 CG7R5[]D-W
TMK042 CG7R6[]D-W
TMK042 CG7R7[]D-W
TMK042 CG7R8[]D-W
TMK042 CG7R9[]D-W
TMK042 CG080[]D-W
TMK042 CG8R1[]D-W
TMK042 CG8R2[]D-W
TMK042 CG8R3[]D-W
TMK042 CG8R4[]D-W
TMK042 CG8R5[]D-W
TMK042 CG8R6[]D-W
TMK042 CG8R7[]D-W
TMK042 CG8R8[]D-W
TMK042 CG8R9[]D-W
TMK042 CG090[]D-W
TMK042 CG9R1[]D-W
TMK042 CG9R2[]D-W
TMK042 CG9R3[]D-W
TMK042 CG9R4[]D-W
TMK042 CG9R5[]D-W
TMK042 CG9R6[]D-W
TMK042 CG9R7[]D-W
TMK042 CG9R8[]D-W
TMK042 CG9R9[]D-W
TMK042 CG100DD-W
TMK042 CG110JD-W
TMK042 CG120JD-W
TMK042 CG130JD-W
TMK042 CG150JD-W
TMK042 CG160JC-W
TMK042 CG180JC-W
TMK042 CG200JC-W
TMK042 CG220JC-W
TMK042 CG240JC-W
TMK042 CG270JC-W
TMK042 CG300JC-W
TMK042 CG330JC-W
TMK042 CG360JC-W
TMK042 CG390JC-W
TMK042 CG430JC-W
TMK042 CG470JC-W
TMK042 CG510JC-W
TMK042 CG560JC-W
TMK042 CG620JC-W
TMK042 CG680JC-W
TMK042 CG750JC-W
TMK042 CG820JC-W
TMK042 CG910JC-W
TMK042 CG101JC-W
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
5.9 p
6 p
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.5pF
518
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
520
6.1 p
6.2 p
6.3 p
6.4 p
6.5 p
6.6 p
6.7 p
6.8 p
6.9 p
7 p
522
524
526
528
530
532
534
536
538
540
7.1 p
7.2 p
7.3 p
7.4 p
7.5 p
7.6 p
7.7 p
7.8 p
7.9 p
8 p
542
544
546
548
550
552
554
556
558
560
8.1 p
8.2 p
8.3 p
8.4 p
8.5 p
8.6 p
8.7 p
8.8 p
8.9 p
9 p
562
564
566
568
570
572
574
576
578
580
9.1 p
9.2 p
9.3 p
9.4 p
9.5 p
9.6 p
9.7 p
9.8 p
9.9 p
10 p
11 p
12 p
13 p
15 p
16 p
18 p
20 p
22 p
24 p
27 p
30 p
33 p
36 p
39 p
43 p
47 p
51 p
56 p
62 p
68 p
75 p
82 p
91 p
100 p
582
25
584
586
588
590
592
594
596
598
600
±5%
620
±5%
640
±5%
660
±5%
700
±5%
720
±5%
760
±5%
800
±5%
840
±5%
880
±5%
940
±5%
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
17
for General Electronic Equipment
■PARTS NUMBER
【Temperature Characteristic CG : CG/C0G(-55~+125℃)】ꢀ0.2mm thickness(C,D)
Soldering
Q
(at 1MHz)
min
408
410
412
414
415
416
418
420
422
424
426
428
430
432
434
436
438
440
442
444
446
448
450
452
454
456
458
460
462
464
466
468
470
472
474
476
478
480
482
484
486
488
490
492
494
496
498
500
502
504
506
508
510
512
514
516
518
520
522
524
526
528
530
532
534
536
538
540
542
544
546
548
550
552
554
556
558
560
562
564
566
568
570
572
574
576
578
580
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Thickness*3
Part number 1
Part number 2
Capacitance tolerance
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
[mm]
Rated voltage x %
EMK042 CG0R4[]D-W
EMK042 CG0R5[]D-W
EMK042 CG0R6[]D-W
EMK042 CG0R7[]D-W
EMK042 CGR75[]D-W
EMK042 CG0R8[]D-W
EMK042 CG0R9[]D-W
EMK042 CG010[]D-W
EMK042 CG1R1[]D-W
EMK042 CG1R2[]D-W
EMK042 CG1R3[]D-W
EMK042 CG1R4[]D-W
EMK042 CG1R5[]D-W
EMK042 CG1R6[]D-W
EMK042 CG1R7[]D-W
EMK042 CG1R8[]D-W
EMK042 CG1R9[]D-W
EMK042 CG020[]D-W
EMK042 CG2R1[]D-W
EMK042 CG2R2[]D-W
EMK042 CG2R3[]D-W
EMK042 CG2R4[]D-W
EMK042 CG2R5[]D-W
EMK042 CG2R6[]D-W
EMK042 CG2R7[]D-W
EMK042 CG2R8[]D-W
EMK042 CG2R9[]D-W
EMK042 CG030[]D-W
EMK042 CG3R1[]D-W
EMK042 CG3R2[]D-W
EMK042 CG3R3[]D-W
EMK042 CG3R4[]D-W
EMK042 CG3R5[]D-W
EMK042 CG3R6[]D-W
EMK042 CG3R7[]D-W
EMK042 CG3R8[]D-W
EMK042 CG3R9[]D-W
EMK042 CG040[]D-W
EMK042 CG4R1[]D-W
EMK042 CG4R2[]D-W
EMK042 CG4R3[]D-W
EMK042 CG4R4[]D-W
EMK042 CG4R5[]D-W
EMK042 CG4R6[]D-W
EMK042 CG4R7[]D-W
EMK042 CG4R8[]D-W
EMK042 CG4R9[]D-W
EMK042 CG050[]D-W
EMK042 CG5R1[]D-W
EMK042 CG5R2[]D-W
EMK042 CG5R3[]D-W
EMK042 CG5R4[]D-W
EMK042 CG5R5[]D-W
EMK042 CG5R6[]D-W
EMK042 CG5R7[]D-W
EMK042 CG5R8[]D-W
EMK042 CG5R9[]D-W
EMK042 CG060[]D-W
EMK042 CG6R1[]D-W
EMK042 CG6R2[]D-W
EMK042 CG6R3[]D-W
EMK042 CG6R4[]D-W
EMK042 CG6R5[]D-W
EMK042 CG6R6[]D-W
EMK042 CG6R7[]D-W
EMK042 CG6R8[]D-W
EMK042 CG6R9[]D-W
EMK042 CG070[]D-W
EMK042 CG7R1[]D-W
EMK042 CG7R2[]D-W
EMK042 CG7R3[]D-W
EMK042 CG7R4[]D-W
EMK042 CG7R5[]D-W
EMK042 CG7R6[]D-W
EMK042 CG7R7[]D-W
EMK042 CG7R8[]D-W
EMK042 CG7R9[]D-W
EMK042 CG080[]D-W
EMK042 CG8R1[]D-W
EMK042 CG8R2[]D-W
EMK042 CG8R3[]D-W
EMK042 CG8R4[]D-W
EMK042 CG8R5[]D-W
EMK042 CG8R6[]D-W
EMK042 CG8R7[]D-W
EMK042 CG8R8[]D-W
EMK042 CG8R9[]D-W
EMK042 CG090[]D-W
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
0.4 p ±0.05pF, ±0.1pF, ±0.25pF
0.5 p ±0.05pF, ±0.1pF, ±0.25pF
0.6 p ±0.05pF, ±0.1pF, ±0.25pF
0.7 p ±0.05pF, ±0.1pF, ±0.25pF
0.75 p ±0.05pF, ±0.1pF, ±0.25pF
0.8 p ±0.05pF, ±0.1pF, ±0.25pF
0.9 p ±0.05pF, ±0.1pF, ±0.25pF
1 p ±0.05pF, ±0.1pF, ±0.25pF
1.1 p ±0.05pF, ±0.1pF, ±0.25pF
1.2 p ±0.05pF, ±0.1pF, ±0.25pF
1.3 p ±0.05pF, ±0.1pF, ±0.25pF
1.4 p ±0.05pF, ±0.1pF, ±0.25pF
1.5 p ±0.05pF, ±0.1pF, ±0.25pF
1.6 p ±0.05pF, ±0.1pF, ±0.25pF
1.7 p ±0.05pF, ±0.1pF, ±0.25pF
1.8 p ±0.05pF, ±0.1pF, ±0.25pF
1.9 p ±0.05pF, ±0.1pF, ±0.25pF
2 p ±0.05pF, ±0.1pF, ±0.25pF
2.1 p ±0.05pF, ±0.1pF, ±0.25pF
2.2 p ±0.05pF, ±0.1pF, ±0.25pF
2.3 p ±0.05pF, ±0.1pF, ±0.25pF
2.4 p ±0.05pF, ±0.1pF, ±0.25pF
2.5 p ±0.05pF, ±0.1pF, ±0.25pF
2.6 p ±0.05pF, ±0.1pF, ±0.25pF
2.7 p ±0.05pF, ±0.1pF, ±0.25pF
2.8 p ±0.05pF, ±0.1pF, ±0.25pF
2.9 p ±0.05pF, ±0.1pF, ±0.25pF
3 p ±0.05pF, ±0.1pF, ±0.25pF
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
3.1 p
3.2 p
3.3 p
3.4 p
3.5 p
3.6 p
3.7 p
3.8 p
3.9 p
4 p
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
4.1 p
4.2 p
4.3 p
4.4 p
4.5 p
4.6 p
4.7 p
4.8 p
4.9 p
5 p
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
16
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
5.1 p
5.2 p
5.3 p
5.4 p
5.5 p
5.6 p
5.7 p
5.8 p
5.9 p
6 p
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
6.1 p
6.2 p
6.3 p
6.4 p
6.5 p
6.6 p
6.7 p
6.8 p
6.9 p
7 p
7.1 p
7.2 p
7.3 p
7.4 p
7.5 p
7.6 p
7.7 p
7.8 p
7.9 p
8 p
8.1 p
8.2 p
8.3 p
8.4 p
8.5 p
8.6 p
8.7 p
8.8 p
8.9 p
9 p
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
18
for General Electronic Equipment
■PARTS NUMBER
Part number 1
Q
(at 1MHz)
min
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Thickness*3 [mm]
Part number 2
Capacitance tolerance
Rated voltage x %
EMK042 CG9R1[]D-W
EMK042 CG9R2[]D-W
EMK042 CG9R3[]D-W
EMK042 CG9R4[]D-W
EMK042 CG9R5[]D-W
EMK042 CG9R6[]D-W
EMK042 CG9R7[]D-W
EMK042 CG9R8[]D-W
EMK042 CG9R9[]D-W
EMK042 CG100DD-W
EMK042 CG110JD-W
EMK042 CG120JD-W
EMK042 CG130JD-W
EMK042 CG150JD-W
EMK042 CG160JC-W
EMK042 CG180JC-W
EMK042 CG200JC-W
EMK042 CG220JC-W
EMK042 CG240JC-W
EMK042 CG270JC-W
EMK042 CG300JC-W
EMK042 CG330JC-W
EMK042 CG360JC-W
EMK042 CG390JC-W
EMK042 CG430JC-W
EMK042 CG470JC-W
EMK042 CG510JC-W
EMK042 CG560JC-W
EMK042 CG620JC-W
EMK042 CG680JC-W
EMK042 CG750JC-W
EMK042 CG820JC-W
EMK042 CG910JC-W
EMK042 CG101JC-W
EMK042 CG221JC-W
EMK042 CG241JC-W
EMK042 CG271JC-W
EMK042 CG331JC-W
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
9.1 p
9.2 p
9.3 p
9.4 p
9.5 p
9.6 p
9.7 p
9.8 p
9.9 p
10 p
11 p
12 p
13 p
15 p
16 p
18 p
20 p
22 p
24 p
27 p
30 p
33 p
36 p
39 p
43 p
47 p
51 p
56 p
62 p
68 p
75 p
82 p
91 p
100 p
220 p
240 p
270 p
330 p
±0.1pF, ±0.25pF, ±0.5pF
582
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
±0.1pF, ±0.25pF, ±0.5pF
584
R
±0.1pF, ±0.25pF, ±0.5pF
586
R
±0.1pF, ±0.25pF, ±0.5pF
588
R
±0.1pF, ±0.25pF, ±0.5pF
590
R
±0.1pF, ±0.25pF, ±0.5pF
592
R
±0.1pF, ±0.25pF, ±0.5pF
594
R
±0.1pF, ±0.25pF, ±0.5pF
596
R
±0.1pF, ±0.25pF, ±0.5pF
±0.5pF
±5%
598
R
600
R
620
R
±5%
640
R
±5%
660
R
±5%
700
R
±5%
720
R
±5%
760
R
±5%
800
R
±5%
840
R
±5%
880
R
16
±5%
940
R
±5%
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
●063TYPE
【Temperature Characteristic CG : CG/C0G(-55~+125℃)】ꢀ0.3mm thickness(T)
Q
(at 1MHz)
min
Soldering
R:Reflow
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Thickness*3 [mm]
Part number 1
Part number 2
Capacitance tolerance
Rated voltage x %
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
UMK063 CG200JT-F
UMK063 CG220JT-F
UMK063 CG240JT-F
UMK063 CG270JT-F
UMK063 CG300JT-F
UMK063 CG330JT-F
UMK063 CG360JT-F
UMK063 CG390JT-F
UMK063 CG430JT-F
UMK063 CG470JT-F
UMK063 CG510JT-F
UMK063 CG560JT-F
UMK063 CG620JT-F
UMK063 CG680JT-F
UMK063 CG750JT-F
UMK063 CG820JT-F
UMK063 CG910JT-F
UMK063 CG101JT-F
UMK063 CG111JT-F
UMK063 CG121JT-F
UMK063 CG131JT-F
UMK063 CG151JT-F
UMK063 CG181JT-F
UMK063 CG201JT-F
UMK063 CG221JT-F
TMK063 CG241JT-F
TMK063 CG271JT-F
TMK063 CG301JT-F
TMK063 CG331JT-F
TMK063 CG361JT-F
TMK063 CG391JT-F
TMK063 CG431JT-F
TMK063 CG471JT-F
TMK063 CG511JT-F
TMK063 CG561JT-F
TMK063 CG621JT-F
TMK063 CG681JT-F
TMK063 CG751JT-F
TMK063 CG821JT-F
TMK063 CG911JT-F
TMK063 CG102JT-F
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
20 p
22 p
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
800
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
840
24 p
880
27 p
940
30 p
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
33 p
36 p
39 p
43 p
47 p
51 p
56 p
50
62 p
68 p
75 p
82 p
91 p
100 p
110 p
120 p
130 p
150 p
180 p
200 p
220 p
240 p
270 p
300 p
330 p
360 p
390 p
430 p
470 p
510 p
560 p
620 p
680 p
750 p
820 p
910 p
1000 p
25
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
19
for General Electronic Equipment
■PARTS NUMBER
●105TYPE
【Temperature Characteristic U△ : U△/U2△(-55~+125℃)】ꢀ0.5mm thickness(V)
Q
(at 1MHz)
min
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Thickness*3 [mm]
Part number 1
Part number 2
Capacitance tolerance
Rated voltage x %
UMK105 UK0R5CV-F
UMK105 UK010CV-F
UMK105 UK1R5CV-F
UMK105 UK020CV-F
UMK105 UK030CV-F
UMK105 UJ040CV-F
UMK105 UJ050CV-F
UMK105 UJ060DV-F
UMK105 UJ070DV-F
UMK105 UJ080DV-F
UMK105 UJ090DV-F
UMK105 UJ100DV-F
UMK105 UJ120JV-F
UMK105 UJ150JV-F
UMK105 UJ180JV-F
UMK105 UJ220JV-F
UMK105 UJ270JV-F
UMK105 UJ330JV-F
UMK105 UJ390JV-F
UMK105 UJ470JV-F
UMK105 UJ560JV-F
UMK105 UJ680JV-F
UMK105 UJ820JV-F
UMK105 UJ101JV-F
UMK105 UJ121JV-F
UMK105 UJ151JV-F
UMK105 UJ181JV-F
UMK105 UJ221JV-F
UMK105 UJ271JV-F
UMK105 UJ331JV-F
UK
UK
UK
UK
UK
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
U2K
U2K
U2K
U2K
U2K
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
0.5 p
1 p
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
410
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
420
R
1.5 p
2 p
430
R
440
R
3 p
460
R
4 p
480
R
5 p
500
R
6 p
520
R
7 p
540
R
8 p
560
R
9 p
580
R
10 p
12 p
15 p
18 p
22 p
27 p
33 p
39 p
47 p
56 p
68 p
82 p
100 p
120 p
150 p
180 p
220 p
270 p
330 p
600
R
640
R
±5%
700
R
±5%
760
R
50
±5%
840
R
±5%
940
R
±5%
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
±5%
R
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
20
for General Electronic Equipment
■PARTS NUMBER
Multilayer Ceramic Capacitors for High Frequency Applications (1GHz+)
●021TYPE
【Temperature Characteristic CG : CG/C0G(-55~+125℃)】ꢀ0.125mm thickness(K)
Soldering
Q
(at 1GHz)
(min)
260
260
260
260
260
260
260
260
260
260
260
250
230
220
210
190
190
180
170
160
160
150
150
140
140
130
130
120
120
120
110
110
110
110
100
100
100
100
90
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Thickness*3
Part number 1
Part number 2
R:Reflow
W:Wave
R
Capacitance tolerance
[mm]
Rated voltage x %
TVS021 CG0R2[]K-W
TVS021 CG0R3[]K-W
TVS021 CG0R4[]K-W
TVS021 CG0R5[]K-W
TVS021 CG0R6[]K-W
TVS021 CG0R7[]K-W
TVS021 CGR75[]K-W
TVS021 CG0R8[]K-W
TVS021 CG0R9[]K-W
TVS021 CG010[]K-W
TVS021 CG1R1[]K-W
TVS021 CG1R2[]K-W
TVS021 CG1R3[]K-W
TVS021 CG1R4[]K-W
TVS021 CG1R5[]K-W
TVS021 CG1R6[]K-W
TVS021 CG1R7[]K-W
TVS021 CG1R8[]K-W
TVS021 CG1R9[]K-W
TVS021 CG020[]K-W
TVS021 CG2R1[]K-W
TVS021 CG2R2[]K-W
TVS021 CG2R3[]K-W
TVS021 CG2R4[]K-W
TVS021 CG2R5[]K-W
TVS021 CG2R6[]K-W
TVS021 CG2R7[]K-W
TVS021 CG2R8[]K-W
TVS021 CG2R9[]K-W
TVS021 CG030[]K-W
TVS021 CG3R1[]K-W
TVS021 CG3R2[]K-W
TVS021 CG3R3[]K-W
TVS021 CG3R4[]K-W
TVS021 CG3R5[]K-W
TVS021 CG3R6[]K-W
TVS021 CG3R7[]K-W
TVS021 CG3R8[]K-W
TVS021 CG3R9[]K-W
TVS021 CG040[]K-W
TVS021 CG4R1[]K-W
TVS021 CG4R2[]K-W
TVS021 CG4R3[]K-W
TVS021 CG4R4[]K-W
TVS021 CG4R5[]K-W
TVS021 CG4R6[]K-W
TVS021 CG4R7[]K-W
TVS021 CG4R8[]K-W
TVS021 CG4R9[]K-W
TVS021 CG050[]K-W
TVS021 CG5R1[]K-W
EVS021 CG5R2[]K-W
EVS021 CG5R3[]K-W
EVS021 CG5R4[]K-W
EVS021 CG5R5[]K-W
EVS021 CG5R6[]K-W
EVS021 CG5R7[]K-W
EVS021 CG5R8[]K-W
EVS021 CG5R9[]K-W
EVS021 CG060[]K-W
EVS021 CG6R1[]K-W
EVS021 CG6R2[]K-W
EVS021 CG6R3[]K-W
EVS021 CG6R4[]K-W
EVS021 CG6R5[]K-W
EVS021 CG6R6[]K-W
EVS021 CG6R7[]K-W
EVS021 CG6R8[]K-W
EVS021 CG6R9[]K-W
EVS021 CG070[]K-W
EVS021 CG7R1[]K-W
EVS021 CG7R2[]K-W
EVS021 CG7R3[]K-W
EVS021 CG7R4[]K-W
EVS021 CG7R5[]K-W
EVS021 CG7R6[]K-W
EVS021 CG7R7[]K-W
EVS021 CG7R8[]K-W
EVS021 CG7R9[]K-W
EVS021 CG080[]K-W
EVS021 CG8R1[]K-W
EVS021 CG8R2[]K-W
EVS021 CG8R3[]K-W
EVS021 CG8R4[]K-W
EVS021 CG8R5[]K-W
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
0.2 p ±0.05pF, ±0.1pF, ±0.25pF
0.3 p ±0.05pF, ±0.1pF, ±0.25pF
0.4 p ±0.05pF, ±0.1pF, ±0.25pF
0.5 p ±0.05pF, ±0.1pF, ±0.25pF
0.6 p ±0.05pF, ±0.1pF, ±0.25pF
0.7 p ±0.05pF, ±0.1pF, ±0.25pF
0.75 p ±0.05pF, ±0.1pF, ±0.25pF
0.8 p ±0.05pF, ±0.1pF, ±0.25pF
0.9 p ±0.05pF, ±0.1pF, ±0.25pF
1 p ±0.05pF, ±0.1pF, ±0.25pF
1.1 p ±0.05pF, ±0.1pF, ±0.25pF
1.2 p ±0.05pF, ±0.1pF, ±0.25pF
1.3 p ±0.05pF, ±0.1pF, ±0.25pF
1.4 p ±0.05pF, ±0.1pF, ±0.25pF
1.5 p ±0.05pF, ±0.1pF, ±0.25pF
1.6 p ±0.05pF, ±0.1pF, ±0.25pF
1.7 p ±0.05pF, ±0.1pF, ±0.25pF
1.8 p ±0.05pF, ±0.1pF, ±0.25pF
1.9 p ±0.05pF, ±0.1pF, ±0.25pF
2 p ±0.05pF, ±0.1pF, ±0.25pF
2.1 p ±0.05pF, ±0.1pF, ±0.25pF
2.2 p ±0.05pF, ±0.1pF, ±0.25pF
2.3 p ±0.05pF, ±0.1pF, ±0.25pF
2.4 p ±0.05pF, ±0.1pF, ±0.25pF
2.5 p ±0.05pF, ±0.1pF, ±0.25pF
2.6 p ±0.05pF, ±0.1pF, ±0.25pF
2.7 p ±0.05pF, ±0.1pF, ±0.25pF
2.8 p ±0.05pF, ±0.1pF, ±0.25pF
2.9 p ±0.05pF, ±0.1pF, ±0.25pF
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
25
R
R
R
R
3 p
3.1 p
3.2 p
3.3 p
3.4 p
3.5 p
3.6 p
3.7 p
3.8 p
3.9 p
4 p
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
R
R
R
R
R
R
R
R
R
R
90
R
4.1 p
4.2 p
4.3 p
4.4 p
4.5 p
4.6 p
4.7 p
4.8 p
4.9 p
5 p
90
R
90
R
90
R
90
R
80
R
80
R
80
R
80
R
80
R
80
R
5.1 p
5.2 p
5.3 p
5.4 p
5.5 p
5.6 p
5.7 p
5.8 p
5.9 p
6 p
80
R
70
R
70
R
70
R
70
R
70
R
70
R
70
R
70
R
70
R
6.1 p
6.2 p
6.3 p
6.4 p
6.5 p
6.6 p
6.7 p
6.8 p
6.9 p
7 p
70
R
60
R
60
R
60
R
60
R
60
R
60
R
60
R
16
60
R
60
R
7.1 p
7.2 p
7.3 p
7.4 p
7.5 p
7.6 p
7.7 p
7.8 p
7.9 p
8 p
60
R
60
R
60
R
60
R
60
R
60
R
50
R
50
R
50
R
50
R
8.1 p
8.2 p
8.3 p
8.4 p
8.5 p
50
R
50
R
50
R
50
R
50
R
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
21
for General Electronic Equipment
■PARTS NUMBER
Q
(at 1GHz)
(min)
50
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Thickness*3 [mm]
Part number 1
Part number 2
Capacitance tolerance
Rated voltage x %
EVS021 CG8R6[]K-W
EVS021 CG8R7[]K-W
EVS021 CG8R8[]K-W
EVS021 CG8R9[]K-W
EVS021 CG090[]K-W
EVS021 CG9R1[]K-W
EVS021 CG9R2[]K-W
EVS021 CG9R3[]K-W
EVS021 CG9R4[]K-W
EVS021 CG9R5[]K-W
EVS021 CG9R6[]K-W
EVS021 CG9R7[]K-W
EVS021 CG9R8[]K-W
EVS021 CG9R9[]K-W
EVS021 CG100[]K-W
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
8.6 p
8.7 p
8.8 p
8.9 p
9 p
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±2%, ±5%
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
50
50
50
50
9.1 p
9.2 p
9.3 p
9.4 p
9.5 p
9.6 p
9.7 p
9.8 p
9.9 p
10 p
50
50
16
50
50
50
50
50
40
40
50
●042TYPE
【Temperature Characteristic CG : CG/C0G(-55~+125℃)】ꢀ0.2mm thickness(C)
Soldering
R:Reflow
Q
(at 1GHz)
(min)
300
300
300
300
300
300
300
300
300
300
280
270
260
250
240
230
220
210
200
190
185
180
175
170
160
155
150
140
135
130
125
125
120
120
110
110
110
100
100
90
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Thickness*3
[mm]
Part number 1
Part number 2
Capacitance tolerance
Rated voltage x %
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
TVS042 CG0R2[]C-W
TVS042 CG0R3[]C-W
TVS042 CG0R4[]C-W
TVS042 CG0R5[]C-W
TVS042 CG0R6[]C-W
TVS042 CG0R7[]C-W
TVS042 CGR75[]C-W
TVS042 CG0R8[]C-W
TVS042 CG0R9[]C-W
TVS042 CG010[]C-W
TVS042 CG1R1[]C-W
TVS042 CG1R2[]C-W
TVS042 CG1R3[]C-W
TVS042 CG1R4[]C-W
TVS042 CG1R5[]C-W
TVS042 CG1R6[]C-W
TVS042 CG1R7[]C-W
TVS042 CG1R8[]C-W
TVS042 CG1R9[]C-W
TVS042 CG020[]C-W
TVS042 CG2R1[]C-W
TVS042 CG2R2[]C-W
TVS042 CG2R3[]C-W
TVS042 CG2R4[]C-W
TVS042 CG2R5[]C-W
TVS042 CG2R6[]C-W
TVS042 CG2R7[]C-W
TVS042 CG2R8[]C-W
TVS042 CG2R9[]C-W
TVS042 CG030[]C-W
TVS042 CG3R1[]C-W
TVS042 CG3R2[]C-W
TVS042 CG3R3[]C-W
TVS042 CG3R4[]C-W
TVS042 CG3R5[]C-W
TVS042 CG3R6[]C-W
TVS042 CG3R7[]C-W
TVS042 CG3R8[]C-W
TVS042 CG3R9[]C-W
TVS042 CG040[]C-W
TVS042 CG4R1[]C-W
TVS042 CG4R2[]C-W
TVS042 CG4R3[]C-W
TVS042 CG4R4[]C-W
TVS042 CG4R5[]C-W
TVS042 CG4R6[]C-W
TVS042 CG4R7[]C-W
TVS042 CG4R8[]C-W
TVS042 CG4R9[]C-W
TVS042 CG050[]C-W
TVS042 CG5R1[]C-W
TVS042 CG5R2[]C-W
TVS042 CG5R3[]C-W
TVS042 CG5R4[]C-W
TVS042 CG5R5[]C-W
TVS042 CG5R6[]C-W
TVS042 CG5R7[]C-W
TVS042 CG5R8[]C-W
TVS042 CG5R9[]C-W
TVS042 CG060[]C-W
TVS042 CG6R1[]C-W
TVS042 CG6R2[]C-W
TVS042 CG6R3[]C-W
TVS042 CG6R4[]C-W
TVS042 CG6R5[]C-W
TVS042 CG6R6[]C-W
TVS042 CG6R7[]C-W
TVS042 CG6R8[]C-W
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
0.2 p ±0.05pF, ±0.1pF, ±0.25pF
0.3 p ±0.05pF, ±0.1pF, ±0.25pF
0.4 p ±0.05pF, ±0.1pF, ±0.25pF
0.5 p ±0.05pF, ±0.1pF, ±0.25pF
0.6 p ±0.05pF, ±0.1pF, ±0.25pF
0.7 p ±0.05pF, ±0.1pF, ±0.25pF
0.75 p ±0.05pF, ±0.1pF, ±0.25pF
0.8 p ±0.05pF, ±0.1pF, ±0.25pF
0.9 p ±0.05pF, ±0.1pF, ±0.25pF
1 p ±0.05pF, ±0.1pF, ±0.25pF
1.1 p ±0.05pF, ±0.1pF, ±0.25pF
1.2 p ±0.05pF, ±0.1pF, ±0.25pF
1.3 p ±0.05pF, ±0.1pF, ±0.25pF
1.4 p ±0.05pF, ±0.1pF, ±0.25pF
1.5 p ±0.05pF, ±0.1pF, ±0.25pF
1.6 p ±0.05pF, ±0.1pF, ±0.25pF
1.7 p ±0.05pF, ±0.1pF, ±0.25pF
1.8 p ±0.05pF, ±0.1pF, ±0.25pF
1.9 p ±0.05pF, ±0.1pF, ±0.25pF
2 p ±0.05pF, ±0.1pF, ±0.25pF
2.1 p ±0.05pF, ±0.1pF, ±0.25pF
2.2 p ±0.05pF, ±0.1pF, ±0.25pF
2.3 p ±0.05pF, ±0.1pF, ±0.25pF
2.4 p ±0.05pF, ±0.1pF, ±0.25pF
2.5 p ±0.05pF, ±0.1pF, ±0.25pF
2.6 p ±0.05pF, ±0.1pF, ±0.25pF
2.7 p ±0.05pF, ±0.1pF, ±0.25pF
2.8 p ±0.05pF, ±0.1pF, ±0.25pF
2.9 p ±0.05pF, ±0.1pF, ±0.25pF
3 p ±0.05pF, ±0.1pF, ±0.25pF
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
3.1 p
3.2 p
3.3 p
3.4 p
3.5 p
3.6 p
3.7 p
3.8 p
3.9 p
4 p
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
25
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
4.1 p
4.2 p
4.3 p
4.4 p
4.5 p
4.6 p
4.7 p
4.8 p
4.9 p
5 p
±0.1pF, ±0.25pF
90
±0.1pF, ±0.25pF
85
±0.1pF, ±0.25pF
85
±0.1pF, ±0.25pF
85
±0.1pF, ±0.25pF
85
±0.1pF, ±0.25pF
85
±0.1pF, ±0.25pF
85
±0.1pF, ±0.25pF
80
±0.1pF, ±0.25pF
80
±0.1pF, ±0.25pF
80
5.1 p
5.2 p
5.3 p
5.4 p
5.5 p
5.6 p
5.7 p
5.8 p
5.9 p
6 p
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
75
75
75
70
70
70
70
70
65
65
6.1 p
6.2 p
6.3 p
6.4 p
6.5 p
6.6 p
6.7 p
6.8 p
65
65
65
65
65
60
60
60
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
22
for General Electronic Equipment
■PARTS NUMBER
Part number 1
Q
(at 1GHz)
(min)
60
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Thickness*3 [mm]
Part number 2
Capacitance tolerance
Rated voltage x %
TVS042 CG6R9[]C-W
TVS042 CG070[]C-W
TVS042 CG7R1[]C-W
TVS042 CG7R2[]C-W
TVS042 CG7R3[]C-W
TVS042 CG7R4[]C-W
TVS042 CG7R5[]C-W
TVS042 CG7R6[]C-W
TVS042 CG7R7[]C-W
TVS042 CG7R8[]C-W
TVS042 CG7R9[]C-W
TVS042 CG080[]C-W
TVS042 CG8R1[]C-W
TVS042 CG8R2[]C-W
TVS042 CG8R3[]C-W
TVS042 CG8R4[]C-W
TVS042 CG8R5[]C-W
TVS042 CG8R6[]C-W
TVS042 CG8R7[]C-W
TVS042 CG8R8[]C-W
TVS042 CG8R9[]C-W
TVS042 CG090[]C-W
TVS042 CG9R1[]C-W
TVS042 CG9R2[]C-W
TVS042 CG9R3[]C-W
TVS042 CG9R4[]C-W
TVS042 CG9R5[]C-W
TVS042 CG9R6[]C-W
TVS042 CG9R7[]C-W
TVS042 CG9R8[]C-W
TVS042 CG9R9[]C-W
TVS042 CG100[]C-W
TVS042 CG110JC-W
TVS042 CG120JC-W
TVS042 CG130JC-W
TVS042 CG150JC-W
TVS042 CG160JC-W
TVS042 CG180JC-W
TVS042 CG220JC-W
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
6.9 p
7 p
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±2%, ±5%
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
60
R
7.1 p
7.2 p
7.3 p
7.4 p
7.5 p
7.6 p
7.7 p
7.8 p
7.9 p
8 p
60
R
60
R
55
R
55
R
55
R
55
R
55
R
55
R
55
R
55
R
8.1 p
8.2 p
8.3 p
8.4 p
8.5 p
8.6 p
8.7 p
8.8 p
8.9 p
9 p
55
R
50
R
50
R
50
R
50
R
50
R
50
R
25
50
R
50
R
50
R
9.1 p
9.2 p
9.3 p
9.4 p
9.5 p
9.6 p
9.7 p
9.8 p
9.9 p
10 p
11 p
12 p
13 p
15 p
16 p
18 p
22 p
45
R
45
R
45
R
45
R
45
R
45
R
45
R
45
R
45
R
45
R
±5%
40
R
±5%
40
R
±5%
40
R
±5%
40
R
±5%
40
R
±5%
40
R
±5%
30
R
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
23
for General Electronic Equipment
■PARTS NUMBER
Super Low Distortion Multilayer Ceramic Capacitors
●105TYPE
【Temperature Characteristic SD : Standard(-55~+125℃)】ꢀ0.5mm thickness(V)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK105 SD391KV-F
UMK105 SD471KV-F
UMK105 SD561KV-F
TMK105 SD681KV-F
TMK105 SD821KV-F
TMK105 SD102KV-F
TMK105 SD122KV-F
EMK105 SD152KV-F
EMK105 SD182KV-F
EMK105 SD222KV-F
EMK105 SD272KV-F
LMK105 SD332KV-F
LMK105 SD392KV-F
LMK105 SD472KV-F
390 p
470 p
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
50
25
560 p
680 p
820 p
1000 p
1200 p
1500 p
1800 p
2200 p
2700 p
3300 p
3900 p
4700 p
Standard Type
16
10
【Temperature Characteristic SD : Standard(-55~+125℃)】ꢀ0.3mm thickness(P)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
LMK105 SD152KP-F
JMK105 SD272KP-F
10
1500 p
2700 p
±10
±10
0.1
0.1
200
200
0.3±0.03
0.3±0.03
Standard Type
6.3
R
●107TYPE
【Temperature Characteristic SD : Standard(-55~+125℃)】ꢀ0.8mm thickness(A)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK107 SD102KA-T
UMK107 SD122KA-T
UMK107 SD152KA-T
UMK107 SD182KA-T
UMK107 SD222KA-T
UMK107 SD272KA-T
UMK107 SD332KA-T
TMK107 SD392KA-T
TMK107 SD472KA-T
EMK107 SD562KA-T
EMK107 SD682KA-T
EMK107 SD822KA-T
EMK107 SD103KA-T
LMK107 SD123KA-T
LMK107 SD153KA-T
LMK107 SD183KA-T
LMK107 SD223KA-T
1000 p
1200 p
1500 p
1800 p
2200 p
2700 p
3300 p
3900 p
4700 p
5600 p
6800 p
8200 p
0.01 μ
0.012 μ
0.015 μ
0.018 μ
0.022 μ
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
50
25
16
Standard Type
10
●212TYPE
【Temperature Characteristic SD : Standard(-55~+125℃)】ꢀ1.25mm thickness(G)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
GMK212 SD183KG-T
GMK212 SD223KG-T
GMK212 SD273KG-T
LMK212 SD683KG-T
LMK212 SD823KG-T
LMK212 SD104KG-T
0.018 μ
0.022 μ
0.027 μ
0.068 μ
0.082 μ
0.1 μ
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
200
200
200
200
200
200
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
R
R
R
R
R
R
35
10
Standard Type
【Temperature Characteristic SD : Standard(-55~+125℃)】ꢀ0.85mm thickness(D)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK212 SD392KD-T
UMK212 SD472KD-T
UMK212 SD562KD-T
UMK212 SD682KD-T
UMK212 SD822KD-T
UMK212 SD103KD-T
GMK212 SD123KD-T
GMK212 SD153KD-T
EMK212 SD333KD-T
LMK212 SD473KD-T
3900 p
4700 p
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
200
200
200
200
200
200
200
200
200
200
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
R
R
R
R
R
R
R
R
R
R
5600 p
50
6800 p
8200 p
Standard Type
0.01 μ
0.012 μ
0.015 μ
0.033 μ
0.047 μ
35
16
10
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
24
for General Electronic Equipment
■PARTS NUMBER
●316TYPE
【Temperature Characteristic SD : Standard(-55~+125℃)】ꢀ1.6mm thickness(L)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
TMK316 SD823KL-T
TMK316 SD104KL-T
0.082 μ
0.1 μ
±10
±10
0.1
0.1
200
200
1.6±0.20
1.6±0.20
R
R
25
Standard Type
【Temperature Characteristic SD : Standard(-55~+125℃)】ꢀ1.15mm thickness(F)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
GMK316 SD333KF-T
GMK316 SD393KF-T
TMK316 SD473KF-T
TMK316 SD563KF-T
TMK316 SD683KF-T
0.033 μ
0.039 μ
0.047 μ
0.056 μ
0.068 μ
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
200
200
200
200
200
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
R
R
R
R
R
35
25
Standard Type
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
25
for General Electronic Equipment
■PARTS NUMBER
Low Distortion High Value Multilayer Ceramic Capacitors(CF_LD)
●107TYPE
【Temperature Characteristic LD : X5R(-55~+85℃)】ꢀ0.8mm thickness(A)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK107BLD224[]A-T
TMK107BLD474[]A-T
TMK107BLD105[]A-T
50
25
X5R
X5R
X5R
0.22 μ
0.47 μ
1 μ
±10, ±20
±10, ±20
±10, ±20
10
10
10
150
150
150
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
R
R
R
●212TYPE
【Temperature Characteristic LD : X5R(-55~+85℃)】ꢀ1.25mm thickness(G)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
GMK212 LD105[]G-T
GMK212BLD225[]G-T
X5R
X5R
1 μ
±10, ±20
±10, ±20
10
10
150
150
1.25±0.10
35
2.2 μ
1.25+0.20/-0
R
●316TYPE
【Temperature Characteristic LD : X5R(-55~+85℃)】ꢀ1.6mm thickness(L)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
UMK316 LD105[]L-T
GMK316BLD475[]L-T
TMK316BLD106[]L-T
50
35
25
X5R
X5R
X5R
1 μ
4.7 μ
10 μ
±10, ±20
±10, ±20
±10, ±20
10
10
10
150
150
150
1.6±0.20
1.6±0.30
1.6±0.30
R
R
R
●325TYPE
【Temperature Characteristic LD : X5R(-55~+85℃)】ꢀ1.9mm thickness(N)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
1.9±0.20
Part number 1
Part number 2
Rated voltage x %
200
UMK325 LD105[]N-T
50
X5R
1 μ
±10, ±20
10
【Temperature Characteristic LD : X5R(-55~+85℃)】ꢀ2.5mm thickness(M)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
2.5±0.20
Part number 1
Part number 2
Rated voltage x %
200
UMK325 LD475[]M-P
50
X5R
4.7 μ
±10, ±20
10
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
26
for General Electronic Equipment
■PARTS NUMBER
Medium-High Voltage Multilayer Ceramic Capacitors
●105TYPE
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ0.5mm thickness(V)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
HMK105 B7221[]V-F
HMK105 B7331[]V-F
HMK105 B7471[]V-F
HMK105 B7681[]V-F
HMK105 B7102[]V-F
HMK105 B7152[]V-F
HMK105 B7222[]V-F
HMK105 B7332[]V-F
HMK105 B7472[]V-F
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
220 p
330 p
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
200
200
200
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
470 p
680 p
100
1000 p
1500 p
2200 p
3300 p
4700 p
【Temperature Characteristic CG : CG/C0G(-55~+125℃)】ꢀ0.5mm thickness(V)
Q
(at 1MHz)
min
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Thickness*3 [mm]
Part number 1
Part number 2
Capacitance tolerance
Rated voltage x %
HMK105 CG080DV-F
HMK105 CG090DV-F
HMK105 CG100DV-F
HMK105 CG120JV-F
HMK105 CG150JV-F
HMK105 CG180JV-F
HMK105 CG220JV-F
HMK105 CG240JV-F
HMK105 CG270JV-F
HMK105 CG330JV-F
HMK105 CG390JV-F
HMK105 CG470JV-F
HMK105 CG560JV-F
HMK105 CG680JV-F
HMK105 CG820JV-F
HMK105 CG101JV-F
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
8 p
9 p
±0.5pF
±0.5pF
±0.5pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
560
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
580
10 p
12 p
15 p
18 p
22 p
24 p
27 p
33 p
39 p
47 p
56 p
68 p
82 p
100 p
600
640
700
760
840
880
100
940
1000
1000
1000
1000
1000
1000
1000
●107TYPE
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ0.8mm thickness(A)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
X5R*1
B
HMK107 BJ102[]A-T
HMK107 BJ152[]A-T
HMK107 BJ222[]A-T
HMK107 BJ332[]A-T
HMK107 BJ472[]A-T
HMK107 BJ682[]A-T
HMK107 BJ103[]A-T
HMK107 BJ153[]A-T
HMK107 BJ223[]A-T
HMK107 BJ333[]A-T
HMK107 BJ473[]A-T
HMK107 BJ104[]A-T
HMK107 BJ224[]A-TE
1000 p
1500 p
2200 p
3300 p
4700 p
6800 p
0.01 μ
0.015 μ
0.022 μ
0.033 μ
0.047 μ
0.1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
200
200
200
200
200
200
200
200
200
200
200
200
150
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
R
R
R
R
R
R
R
R
R
R
R
R
R
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
100
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
0.22 μ
【Temperature Characteristic C7 : X7S(-55~+125℃)】ꢀ0.8mm thickness(A)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
0.8±0.10
Part number 1
Part number 2
Rated voltage x %
150
HMK107 C7224[]A-TE
100
X7S
0.22 μ
±10, ±20
3.5
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ0.8mm thickness(A)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
HMK107 B7102[]A-T
HMK107 B7152[]A-T
HMK107 B7222[]A-T
HMK107 B7332[]A-T
HMK107 B7472[]A-T
HMK107 B7682[]A-T
HMK107 B7103[]A-T
HMK107 B7153[]A-T
HMK107 B7223[]A-T
HMK107 B7333[]A-T
HMK107 B7473[]A-T
HMK107 B7104[]A-T
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
1000 p
1500 p
2200 p
3300 p
4700 p
6800 p
0.01 μ
0.015 μ
0.022 μ
0.033 μ
0.047 μ
0.1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
200
200
200
200
200
200
200
200
200
200
200
200
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
R
R
R
R
R
R
R
R
R
R
R
R
100
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
27
for General Electronic Equipment
■PARTS NUMBER
【Temperature Characteristic SD : Standard(-55~+125℃)】ꢀ0.8mm thickness(A)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
HMK107 SD101KA-T
HMK107 SD121KA-T
HMK107 SD151KA-T
HMK107 SD181KA-T
HMK107 SD221KA-T
HMK107 SD271KA-T
HMK107 SD331KA-T
HMK107 SD391KA-T
HMK107 SD471KA-T
HMK107 SD561KA-T
HMK107 SD681KA-T
HMK107 SD821KA-T
HMK107 SD102KA-T
100 p
120 p
150 p
180 p
220 p
270 p
330 p
390 p
470 p
560 p
680 p
820 p
1000 p
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
200
200
200
200
200
200
200
200
200
200
200
200
200
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
R
R
R
R
R
R
R
R
R
R
R
R
R
100
Standard Type
●212TYPE
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ1.25mm thickness(G)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
X5R*1
B
HMK212 BJ103[]G-T
HMK212 BJ153[]G-T
HMK212 BJ223[]G-T
HMK212 BJ333[]G-T
HMK212 BJ473[]G-T
HMK212 BJ683[]G-T
HMK212 BJ104[]G-T
HMK212 BJ224[]G-T
HMK212 BJ474[]G-TE
HMK212BBJ105[]G-TE
QMK212 BJ472[]G-T
QMK212 BJ682[]G-T
QMK212 BJ103[]G-T
QMK212 BJ153[]G-T
QMK212 BJ223[]G-T
0.01 μ
0.015 μ
0.022 μ
0.033 μ
0.047 μ
0.068 μ
0.1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
200
200
150
150
150
150
150
150
150
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25+0.20/-0
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
100
X5R*1
B
X5R*1
B
X5R*1
B
0.22 μ
0.47 μ
1 μ
X5R*1
B
X5R*1
B
X5R*1
B
4700 p
X5R*1
B
6800 p
X5R*1
B
250
0.01 μ
0.015 μ
0.022 μ
X5R*1
B
X5R*1
B
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ0.85mm thickness(D)
Soldering
R:Reflow
W:Wave
R
R
R
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
X5R*1
B
QMK212 BJ102[]D-T
QMK212 BJ152[]D-T
QMK212 BJ222[]D-T
QMK212 BJ332[]D-T
1000 p
1500 p
2200 p
3300 p
±10, ±20
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
2.5
2.5
150
150
150
150
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
X5R*1
B
250
X5R*1
B
X5R*1
B
【Temperature Characteristic C7 : X7S(-55~+125℃)】ꢀ1.25mm thickness(G)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
HMK212 C7474[]G-TE
HMK212BC7105[]G-TE
100
100
X7S
X7S
0.47 μ
1 μ
±10, ±20
±10, ±20
3.5
3.5
150
150
1.25±0.10
1.25+0.20/-0
R
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ1.25mm thickness(G)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
HMK212 B7103[]G-T
HMK212 B7153[]G-T
HMK212 B7223[]G-T
HMK212 B7333[]G-T
HMK212 B7473[]G-T
HMK212 B7683[]G-T
HMK212 B7104[]G-T
HMK212 B7224[]G-T
QMK212 B7472[]G-T
QMK212 B7682[]G-T
QMK212 B7103[]G-T
QMK212 B7153[]G-T
QMK212 B7223[]G-T
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.01 μ
0.015 μ
0.022 μ
0.033 μ
0.047 μ
0.068 μ
0.1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
200
200
150
150
150
150
150
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
R
R
R
R
R
R
R
R
R
R
R
R
R
100
250
0.22 μ
4700 p
6800 p
0.01 μ
0.015 μ
0.022 μ
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ0.85mm thickness(D)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
QMK212 B7102[]D-T
QMK212 B7152[]D-T
QMK212 B7222[]D-T
QMK212 B7332[]D-T
X7R
X7R
X7R
X7R
1000 p
1500 p
2200 p
3300 p
±10, ±20
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
2.5
2.5
150
150
150
150
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
R
R
R
R
250
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
28
for General Electronic Equipment
■PARTS NUMBER
【Temperature Characteristic SD : Standard(-55~+125℃)】ꢀ0.85mm thickness(D)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
HMK212 SD222KD-T
HMK212 SD472KD-T
QMK212 SD101KD-T
QMK212 SD121KD-T
QMK212 SD151KD-T
QMK212 SD181KD-T
QMK212 SD221KD-T
QMK212 SD331KD-T
QMK212 SD391KD-T
QMK212 SD471KD-T
QMK212 SD561KD-T
QMK212 SD681KD-T
QMK212 SD821KD-T
QMK212 SD102KD-T
2200 p
4700 p
100 p
120 p
150 p
180 p
220 p
330 p
390 p
470 p
560 p
680 p
820 p
1000 p
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
200
200
150
150
150
150
150
150
150
150
150
150
150
150
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
R
R
R
R
R
R
R
R
R
R
R
R
R
R
100
Standard Type
250
【Temperature Characteristic SD : Standard(-55~+125℃)】ꢀ1.25mm thickness(G)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
1.25±0.10
Part number 1
Part number 2
Rated voltage x %
200
Standard Type
HMK212 SD392KG-T
100
3900 p
±10
0.1
●316TYPE
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ1.6mm thickness(L)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
X5R*1
B
HMK316 BJ473[]L-T
HMK316 BJ683[]L-T
HMK316 BJ104[]L-T
HMK316 BJ154[]L-T
HMK316 BJ224[]L-T
HMK316 BJ334[]L-T
HMK316 BJ474[]L-T
HMK316 BJ105[]L-T
HMK316ABJ225[]L-TE
QMK316 BJ333[]L-T
QMK316 BJ473[]L-T
QMK316 BJ683[]L-T
QMK316 BJ104[]L-T
SMK316 BJ153[]L-T
SMK316 BJ223[]L-T
0.047 μ
0.068 μ
0.1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
200
200
150
150
150
150
150
120
120
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
X5R*1
B
X5R*1
B
X5R*1
B
0.15 μ
0.22 μ
0.33 μ
0.47 μ
1 μ
X5R*1
B
100
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
2.2 μ
X5R*1
B
0.033 μ
0.047 μ
0.068 μ
0.1 μ
X5R*1
B
250
630
X5R*1
B
X5R*1
B
X5R*1
B
0.015 μ
0.022 μ
X5R*1
B
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ1.15mm thickness(F)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
X5R*1
B
SMK316 BJ102[]F-T
SMK316 BJ152[]F-T
SMK316 BJ222[]F-T
SMK316 BJ332[]F-T
SMK316 BJ472[]F-T
SMK316 BJ682[]F-T
SMK316 BJ103[]F-T
1000 p
1500 p
2200 p
3300 p
4700 p
6800 p
0.01 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
120
120
120
120
120
120
120
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
R
R
R
R
R
R
R
X5R*1
B
X5R*1
B
X5R*1
B
630
X5R*1
B
X5R*1
B
X5R*1
B
【Temperature Characteristic C7 : X7S(-55~+125℃)】ꢀ1.6mm thickness(L)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
1.6±0.20
Part number 1
Part number 2
Rated voltage x %
150
HMK316AC7225[]L-TE
100
X7S
2.2 μ
±10, ±20
3.5
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ1.6mm thickness(L)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
HMK316 B7473[]L-T
HMK316 B7683[]L-T
HMK316 B7104[]L-T
HMK316 B7154[]L-T
HMK316 B7224[]L-T
HMK316 B7334[]L-T
HMK316 B7474[]L-T
HMK316 B7105[]L-T
QMK316 B7333[]L-T
QMK316 B7473[]L-T
QMK316 B7683[]L-T
QMK316 B7104[]L-T
SMK316 B7153[]L-T
SMK316 B7223[]L-T
SMK316AB7333[]L-T
SMK316AB7473[]L-T
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.047 μ
0.068 μ
0.1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
200
200
150
150
150
150
120
120
120
120
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
0.15 μ
0.22 μ
0.33 μ
0.47 μ
1 μ
100
0.033 μ
0.047 μ
0.068 μ
0.1 μ
250
630
0.015 μ
0.022 μ
0.033 μ
0.047 μ
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
29
for General Electronic Equipment
■PARTS NUMBER
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ1.15mm thickness(F)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
SMK316 B7102[]F-T
SMK316 B7152[]F-T
SMK316 B7222[]F-T
SMK316 B7332[]F-T
SMK316 B7472[]F-T
SMK316 B7682[]F-T
SMK316 B7103[]F-T
X7R
X7R
X7R
X7R
X7R
X7R
X7R
1000 p
1500 p
2200 p
3300 p
4700 p
6800 p
0.01 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
120
120
120
120
120
120
120
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
R
R
R
R
R
R
R
630
【Temperature Characteristic SD : Standard(-55~+125℃)】ꢀ1.6mm thickness(L)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
HMK316 SD223KL-T
QMK316 SD103KL-T
100
250
0.022 μ
0.01 μ
±10
±10
0.1
0.1
200
150
1.6±0.20
1.6±0.20
Standard Type
R
●325TYPE
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ2.5mm thickness(M)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
X5R*1
B
X5R*1
B
HMK325 BJ225[]M-P
HMK325 BJ475[]M-PE
100
100
2.2 μ
4.7 μ
±10, ±20
±10, ±20
3.5
3.5
200
150
2.5±0.20
2.5±0.20
R
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ1.9mm thickness(N)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
X5R*1
B
HMK325 BJ154[]N-T
HMK325 BJ224[]N-T
HMK325 BJ334[]N-T
HMK325 BJ474[]N-T
HMK325 BJ684[]N-T
HMK325 BJ105[]N-T
HMK325 BJ475[]N-TE
QMK325 BJ473[]N-T
QMK325 BJ104[]N-T
QMK325 BJ154[]N-T
QMK325 BJ224[]N-T
SMK325 BJ223[]N-T
SMK325 BJ333[]N-T
SMK325 BJ473[]N-T
0.15 μ
0.22 μ
0.33 μ
0.47 μ
0.68 μ
1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
150
150
150
150
150
120
120
120
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
R
R
R
R
R
R
R
R
R
R
R
R
R
R
X5R*1
B
X5R*1
B
X5R*1
B
100
X5R*1
B
X5R*1
B
X5R*1
B
4.7 μ
X5R*1
B
0.047 μ
0.1 μ
X5R*1
B
250
630
X5R*1
B
0.15 μ
0.22 μ
0.022 μ
0.033 μ
0.047 μ
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】ꢀ1.15mm thickness(F)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
1.15±0.10
Part number 1
Part number 2
Rated voltage x %
200
X5R*1
B
HMK325 BJ104[]F-T
100
0.1 μ
±10, ±20
3.5
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ2.5mm thickness(M)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
2.5±0.20
Part number 1
Part number 2
Rated voltage x %
200
HMK325 B7225[]M-P
100
X7R
2.2 μ
±10, ±20
3.5
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ1.9mm thickness(N)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
HMK325 B7154[]N-T
HMK325 B7224[]N-T
HMK325 B7334[]N-T
HMK325 B7474[]N-T
HMK325 B7684[]N-T
HMK325 B7105[]N-T
QMK325 B7473[]N-T
QMK325 B7104[]N-T
QMK325 B7154[]N-T
QMK325 B7224[]N-T
SMK325 B7223[]N-T
SMK325 B7333[]N-T
SMK325 B7473[]N-T
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.15 μ
0.22 μ
0.33 μ
0.47 μ
0.68 μ
1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
150
150
150
150
120
120
120
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
R
R
R
R
R
R
R
R
R
R
R
R
R
100
0.047 μ
0.1 μ
250
630
0.15 μ
0.22 μ
0.022 μ
0.033 μ
0.047 μ
【Temperature Characteristic C7 : X7S(-55~+125℃)】ꢀ2.5mm thickness(M)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
2.5±0.20
Part number 1
Part number 2
Rated voltage x %
150
HMK325 C7475[]M-PE
100
X7S
4.7 μ
±10, ±20
3.5
【Temperature Characteristic C7 : X7S(-55~+125℃)】ꢀ1.9mm thickness(N)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
1.9±0.20
Part number 1
Part number 2
Rated voltage x %
150
HMK325 C7475[]N-TE
100
X7S
4.7 μ
±10, ±20
3.5
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
30
for General Electronic Equipment
■PARTS NUMBER
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ1.15mm thickness(F)
Soldering
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
1.15±0.10
Part number 1
Part number 2
R:Reflow
W:Wave
R
Rated voltage x %
200
HMK325 B7104[]F-T
100
X7R
0.1 μ
±10, ±20
3.5
●432TYPE
【Temperature Characteristic BJ : B(-25~+85℃)/X5R(-55~+85℃)】 2.5mm thickness(M)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
X5R*1
B
HMK432 BJ474[]M-T
HMK432 BJ105[]M-T
HMK432 BJ155[]M-T
HMK432 BJ225[]M-T
QMK432 BJ104[]M-T
QMK432 BJ224[]M-T
QMK432 BJ334[]M-T
QMK432 BJ474[]M-T
SMK432 BJ473[]M-T
SMK432 BJ683[]M-T
SMK432 BJ104[]M-T
0.47 μ
1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
150
150
150
150
120
120
120
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
R
R
R
R
R
R
R
R
R
R
R
X5R*1
B
100
X5R*1
B
1.5 μ
X5R*1
B
2.2 μ
X5R*1
B
0.1 μ
X5R*1
B
0.22 μ
0.33 μ
0.47 μ
0.047 μ
0.068 μ
0.1 μ
250
630
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
【Temperature Characteristic B7 : X7R(-55~+125℃)】 2.5mm thickness(M)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
HMK432 B7474[]M-T
HMK432 B7105[]M-T
HMK432 B7155[]M-T
HMK432 B7225[]M-T
QMK432 B7104[]M-T
QMK432 B7224[]M-T
QMK432 B7334[]M-T
QMK432 B7474[]M-T
SMK432 B7473[]M-T
SMK432 B7683[]M-T
SMK432 B7104[]M-T
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.47 μ
1 μ
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
150
150
150
150
120
120
120
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
R
R
R
R
R
R
R
R
R
R
R
100
1.5 μ
2.2 μ
0.1 μ
0.22 μ
0.33 μ
0.47 μ
0.047 μ
0.068 μ
0.1 μ
250
630
【Temperature Characteristic B7 : X7R(-55~+125℃)】ꢀ2.0mm thickness(Y)
Soldering
R:Reflow
W:Wave
R
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
XMK432 B7222KY-TE
XMK432 B7472KY-TE
2000
2000
X7R
X7R
2200 p
4700 p
±10
±10
2.5
2.5
110
110
2.0+0/-0.30
2.0+0/-0.30
R
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
31
for General Electronic Equipment
■PARTS NUMBER
LW Reversal Decoupling Capacitors(LWDCTM
●105TYPE
)
【Temperature Characteristic BJ : X5R(-55~+85℃)】 0.3mm thickness(P)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
TWK105 BJ104MP-F
EWK105 BJ224MP-F
LWK105 BJ474MP-F
JWK105 BJ104MP-F
JWK105 BJ474MP-F
JWK105 BJ105MP-F
JWK105 BJ225MP-F
25
16
10
X5R
X5R
X5R
X5R*1
X5R*1
X5R
0.1 μ
0.22 μ
0.47 μ
0.1 μ
0.47 μ
1 μ
±20
±20
±20
±20
±20
±20
±20
5
150
150
150
150
150
150
150
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
R
R
R
R
R
R
R
10
10
5
10
10
10
6.3
X5R
2.2 μ
【Temperature Characteristic C6 : X6S(-55~+105℃), C7 : X7S(-55~+125℃)】 0.3mm thickness(P)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
EWK105 C6104MP-F
LWK105 C7104MP-F
LWK105 C6224MP-F
JWK105 C7104MP-F
JWK105 C7224MP-F
JWK105 C6474MP-F
AWK105 C6224MP-F
AWK105 C6474MP-F
AWK105 C6105MP-F
AWK105 C6225MP-F
16
10
X6S
X7S
X6S
X7S
X7S
X6S
X6S
X6S
X6S
X6S
0.1 μ
0.1 μ
0.22 μ
0.1 μ
0.22 μ
0.47 μ
0.22 μ
0.47 μ
1 μ
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
5
150
150
150
150
150
150
150
150
150
150
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
R
R
R
R
R
R
R
R
R
R
5
10
5
6.3
4
10
10
10
10
10
10
2.2 μ
●107TYPE
【Temperature Characteristic BJ : X5R(-55~+85℃)】 0.5mm thickness(V)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
X5R*1
X5R*1
X5R*1
X5R
TWK107 BJ104MV-T
EWK107 BJ224MV-T
EWK107 BJ474MV-T
LWK107 BJ105MV-T
LWK107 BJ225MV-T
JWK107 BJ105MV-T
JWK107 BJ225MV-T
JWK107 BJ475MV-T
AWK107 BJ106MV-T
25
16
0.1 μ
0.22 μ
0.47 μ
1 μ
±20
±20
±20
±20
±20
±20
±20
±20
±20
5
150
150
150
150
150
150
150
150
150
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
5
5
10
10
10
10
10
10
10
X5R
2.2 μ
1 μ
X5R*1
X5R
X5R
X5R
6.3
4
2.2 μ
4.7 μ
10 μ
【Temperature Characteristic B7 : X7R(-55~+125℃), C6 : X6S(-55~+105℃), C7 : X7S(-55~+125℃)】 0.5mm thickness(V)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
characteristics
Rated voltage x %
TWK107 B7104MV-T
EWK107 B7224MV-T
EWK107 B7474MV-T
JWK107 C7105MV-T
AWK107 C7225MV-T
AWK107 C6475MV-T
PWK107 C6106MV-T
25
16
6.3
4
X7R
X7R
X7R
X7S
X7S
X6S
X6S
0.1 μ
0.22 μ
0.47 μ
1 μ
±20
±20
±20
±20
±20
±20
±20
5
5
150
150
150
150
150
150
150
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
5
10
10
10
10
2.2 μ
4.7 μ
10 μ
2.5
●212TYPE
【Temperature Characteristic BJ : X5R(-55~+85℃)】 0.85mm thickness(D)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
25
16
X5R
X5R
X5R
X5R
X5R
4.7 μ
10 μ
4.7 μ
10 μ
22 μ
±10, ±20
±20
10
10
10
10
10
150
150
150
150
150
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
R
R
R
R
R
TWK212 BJ475[]D-T
EWK212 BJ106MD-T
LWK212 BJ475[]D-T
LWK212 BJ106MD-T
JWK212 BJ226MD-T
±10, ±20
±20
10
6.3
±20
【Temperature Characteristic B7 : X7R(-55~+125℃), C6 : X6S(-55~+105℃)】 0.85mm thickness(D)
Soldering
R:Reflow
W:Wave
HTLT
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[%]
tanδ
[%]
Thickness*3 [mm]
Part number 1
Part number 2
Rated voltage x %
25
16
10
4
X7R
X6S
X6S
X6S
2.2 μ
4.7 μ
10 μ
22 μ
±10, ±20
±10, ±20
±20
5
150
150
150
150
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
R
R
R
R
TWK212 B7225[]D-T
EWK212 C6475[]D-T
LWK212 C6106MD-T
AWK212 C6226MD-T
10
10
10
±20
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
32
Multilayer Ceramic Capacitors
■PACKAGING
①Minimum Quantity
●Taped package
Thickness
Standard quantity [pcs]
Type(EIA)
mm
code
K
Paper tape
Embossed tape
□MK021(008004)
□VS021(008004)
□MK042(01005)
□VS042(01005)
□MK063(0201)
0.125
-
-
50000
0.2
0.2
C, D
C
P,T
P
40000
0.3
15000
10000
-
-
-
□WK105(0204) ※
0.3
0.13
0.18
0.2
H
E
20000
15000
-
-
□MK105(0402)
□MF105(0402)
C
P
20000
15000
10000
10000
4000
-
0.3
-
0.5
V
W
K
-
□VK105(0402)
□MK107(0603)
□WK107(0306) ※
□MF107(0603)
□VS107(0603)
□MJ107(0603)
0.5
-
0.45
0.5
-
V
A
C
A
K
4000
-
0.8
4000
4000
3000
0.7
-
0.8
3000
0.45
0.85
1.25
0.85
0.85
1.25
0.85
1.15
1.6
□MK212(0805)
4000
-
□WK212(0508)
□MF212(0805)
※
D
G
D
D
G
D
F
-
4000
4000
-
3000
-
□VS212(0805)
□MJ212(0805)
-
2000
-
4000
-
□MK316(1206)
□MF316(1206)
3000
2000
3000
2000
L
-
1.15
1.6
F
-
□MJ316(1206)
L
-
0.85
1.15
1.9
D
F
-
2000
□MK325(1210)
□MF325(1210)
N
Y
2.0max.
2.5
M
N
M
M
-
-
-
-
1000
2000
1.9
□MJ325(1210)
□MK432(1812)
2.5
500(T), 1000(P)
500
2.5
Note : ※ LW Reverse type.
②Taping material
※No bottom tape for pressed carrier tape
●Card board carrier tape
●Embossed tape
Top tape
Top tape
Base tape
Sprocket hole
Chip cavity
Sprocket hole
Chip cavity
Bottom tape
Base tape
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E06R01
Chip filled
Chip
※ LW Reverse type.
③Representative taping dimensions
●Paper Tape(8mm wide)
●Pressed carrier tape( 2mm pitch)
Unit:mm(inch)
T
1.75±0.1
φ1.5+0.1/-0
(0.069±0.004)
(φ0.059+0.004/-0)
Sprocket hole
A
B
T1
2.0±0.05
4.0±0.1
F
(0.079±0.002) (0.157±0.004)
Chip Cavity
Insertion Pitch
Tape Thickness
Type(EIA)
A
B
F
T
T1
□MK063(0201)
0.37
0.67
0.45max.
0.42max.
□WK105(0204) ※
□MK105(0402) (*1 C)
□MK105(0402) (*1 P)
2.0±0.05
0.65
1.15
0.4max.
0.3max.
0.42max.
Unit:mm
0.45max.
Note *1 Thickness, C:0.2mm ,P:0.3mm. ※ LW Reverse type.
●Punched carrier tape (2mm pitch)
Unit:mm(inch)
1.75±0.1
φ1.5+0.1/-0
(0.069±0.004)
(φ0.059+0.004/-0)
Sprocket hole
T
A
B
F
2.0±0.05
4.0±0.1
(0.079±0.002) (0.157±0.004)
Chip Cavity
Insertion Pitch
F
Tape Thickness
T
Type(EIA)
A
B
□MK105 (0402)
□MF105 (0402)
□VK105 (0402)
0.65
1.15
2.0±0.05
0.8max.
Unit:mm
●Punched carrier tape (4mm pitch)
φ1.5+0.1/-0
Unit:mm(inch)
T
1.75±0.1
(0.069±0.004)
(φ0.059+0.004/-0)
Sprocket hole
A
B
4.0±0.1
(0.157±0.004)
2.0±0.1
F
(0.079±0.004)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E06R01
Chip Cavity
Insertion Pitch
F
Tape Thickness
T
Type(EIA)
A
B
□MK107(0603)
□WK107(0306)
□MF107(0603)
□MK212(0805)
□WK212(0508)
□MK316(1206)
※
※
1.0
1.8
1.1max.
4.0±0.1
1.65
2.0
2.4
3.6
1.1max.
Note:Taping size might be different depending on the size of the product. ※ LW Reverse type.
Unit:mm
●Embossed tape(4mm wide)
Sprocket hole
Unit:mm(inch)
0.9±0.05
φ0.8±0.04
(0.035±0.002)
(φ0.031±0.002)
A
B
F
1.0±0.02
2.0±0.04
(0.039±0.001) (0.079±0.002)
Chip Cavity
Insertion Pitch
Tape Thickness
Type(EIA)
A
B
F
K
T
□MK021(008004)
□VS021(008004)
□MK042(01005)
□VS042(01005)
0.135
0.27
1.0±0.02
0.5max.
0.25max.
Unit:mm
0.23
0.43
●Embossed tape(8mm wide)
Unit:mm(inch)
1.75±0.1
φ1.5+0.1/-0
(0.069±0.004)
(φ0.059+0.004/-0)
Sprocket hole
A
B
F
4.0±0.1
(0.157±0.004)
2.0±0.1
(0.079±0.004)
Chip Cavity
Insertion Pitch
Tape Thickness
Type(EIA)
A
B
F
K
T
□MK105(0402)
0.6
1.0
1.1
1.8
2.0±0.1
0.6max
1.3max.
0.2±0.1
0.25±0.1
□WK107(0306) ※
□MK212(0805)
1.65
2.0
2.4
3.6
3.6
□MF212(0805)
4.0±0.1
□MK316(1206)
□MF316(1206)
3.4max.
0.6max.
□MK325(1210)
2.8
□MF325(1210)
Note: ※ LW Reverse type.
Unit:mm
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E06R01
●Embossed tape(12mm wide)
φ1.5+0.1/-0
(φ0.059+0.004/-0)
Unit:mm(inch)
1.75±0.1
(0.069±0.004)
Sprocket hole
A
B
4.0±0.1
2.0±0.1
(0.157±0.004)
F
(0.079±0.004)
Chip Cavity
Insertion Pitch
F
Tape Thickness
Type(EIA)
A
B
K
T
□MK325(1210)
□MK432(1812)
3.1
3.7
4.0
4.9
8.0±0.1
8.0±0.1
4.0max.
4.0max.
0.6max.
0.6max.
Unit:mm
④Trailer and Leader
Blank portion
Chip cavity
Blank portion
Leader
100mm or more
160mm or more
(3.94inches or more)
(6.3inches or more)
400mm or more
(15.7inches or more)
Direction of tape feed
⑤Reel size
t
E
C
B
A
R
D
W
A
B
C
φ13.0±0.2
D
E
R
φ178±2.0
φ50min.
φ21.0±0.8
2.0±0.5
1.0
T
W
4mm wide tape
8mm wide tape
12mm wide tape
1.5max.
2.5max.
2.5max.
5±1.0
10±1.5
14±1.5
Unit:mm
⑥Top Tape Strength
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below.
Pull direction
0~20°
Top tape
Base tape
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E06R01
Super Low Distortion Multilayer Ceramic Capacitors , Medium-High Voltage Multilayer Ceramic Capacitors and
High Reliability Application Multilayer Ceramic Capacitors are noted separately.
Multilayer Ceramic Capacitors
■RELIABILITY DATA
1.Operating Temperature Range
Standard
Temperature
-55 to +125℃
Compensating(Class1)
High Frequency Type
Specification
Temperature Range
-25 to +85℃
-55 to +85℃
-55 to +125℃
-55 to +105℃
-55 to +125℃
B
BJ
Specified
Value
X5R
X7R
X6S
X7S
B7
C6
C7
High Permittivity (Class2)
LD(※)
X5R
-55 to +85℃
Note: ※LD Low distortion high value multilayer ceramic capacitor
2. Storage Conditions
Temperature
Standard
-55 to +125℃
Compensating(Class1)
High Frequency Type
Specification
Temperature Range
-25 to +85℃
-55 to +85℃
-55 to +125℃
-55 to +105℃
-55 to +125℃
-55 to +85℃
B
BJ
Specified
Value
X5R
X7R
X6S
X7S
X5R
B7
C6
High Permittivity (Class2)
C7
LD(※)
Note: ※LD Low distortion high value multilayer ceramic capacitor
3. Rated Voltage
Standard
50VDC, 25VDC, 16VDC
Temperature
Specified
Value
Compensating(Class1)
High Frequency Type 50VDC, 25VDC, 16VDC
50VDC, 35VDC, 25VDC, 16VDC, 10VDC, 6.3VDC, 4VDC, 2.5VDC
High Permittivity (Class2)
4. Withstanding Voltage (Between terminals)
Temperature
Standard
Specified
Compensating(Class1)
High Frequency Type No breakdown or damage
Value
High Permittivity (Class2)
Class 1
Class 2
Rated voltage×2.5
Test
Applied voltage
Methods and
Duration
Rated voltage×3
1 to 5 sec.
50mA max.
Remarks
Charge/discharge current
5. Insulation Resistance
Temperature
Standard
High Frequency Type
10000 MΩ min.
Compensating(Class1)
Specified
C≦0.047
Value
High Permittivity (Class2) Note 1
F : 10000 MΩ min.
C>0.047μF : 500MΩ・μF
Test
Methods and
Remarks
Applied voltage
Duration
: Rated voltage
: 60±5 sec.
: 50mA max.
Charge/discharge current
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E09R01
6. Capacitance (Tolerance)
0.2pF≦C≦5pF
0.2pF≦C≦10pF
C>10pF
: ±0.25pF
C□
U□
Standard
: ±0.5pF
Temperature
Specified
: ±5% or ±10%
Compensating(Class1)
Value
0.2pF≦C≦2pF
C>2pF
: ±0.1pF
: ±5%
High Frequency Type
CG
High Permittivity (Class2)
±10% or ±20%
Class 1
Class 2
Standard
High Frequency Type
C≦10μF
C>10μF
Test
Preconditioning
None
Thermal treatment (at 150℃ for 1hr) Note 2
Methods and
Remarks
Measuring frequency
Measuring voltage Nte
Bias application
1MHz±10%
0.5 to 5Vrms
1kHz±10%
1±0.2Vrms
120±10Hz
0.5±0.1Vrms
None
7. Q or Dissipation Factor
C<30pF : Q≧400+20C
C≧30pF : Q≧1000
Standard
Temperature
Compensating(Class1)
(C:Nominal capacitance)
Specified
Value
High Frequency Type Refer to detailed specification
High Permittivity (Class2) Note 1
BJ, B7, C6, C7:2.5% max.
Class 1
High Frequency Type
None
Class 2
Standard
C≦10μF
C>10μF
Preconditioning
Thermal treatment (at 150℃ for 1hr) Note 2
Test
Measuring frequency
Measuring voltage Note 1
Bias application
1MHz±10%
1GHz
1kHz±10%
1±0.2Vrms
120±10Hz
Methods and
Remarks
0.5 to 5Vrms
0.5±0.1Vrms
None
High Frequency Type
Measuring equipment
Measuring jig
: HP4291A
: HP16192A
8. Temperature Characteristic (Without voltage application)
Temperature Characteristic [ppm/℃]
Tolerance [ppm/℃]
C□ :
0
CG
G : ±30
J:±120
K:±250
Standard
Temperature
U□ : -750
UJ, UK
Compensating(Class1)
High Frequency Type
Temperature Characteristic [ppm/℃]
Tolerance [ppm/℃]
G : ±30
C□ :
0
CG
Capacitance
change
±10%
Reference
Specified
Value
Specification
Temperature Range
temperature
20℃
B
-25 to +85℃
-55 to +85℃
-55 to +125℃
-55 to +105℃
-55 to +125℃
-55 to +85℃
BJ
X5R
X7R
XS
±15%
25℃
High Permittivity (Class2)
B7
C6
±15%
25℃
±22%
25℃
C7
X7S
X5R
±22%
25℃
LD(※)
±15%
25℃
Note : ※LD Low distortion high value multilayer ceramic capacitor
Class 1
Capacitance at 20℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the
following equation.
(C85-C20)
×106(ppm/℃)
C20×△T
△T=65
Class 2
Test
Methods and
Remarks
Capacitance at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following
equation.
Step
B
X5R、X7R、X6S、X7S
Minimum operating temperature
1
2
3
20℃
25℃
Maximum operating temperature
(C-C2)
C2
C
:Capacitance in Step 1 or Step 3
×100(%)
C2 :Capacitance in Step 2
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E09R01
9. Deflection
Appearance
Capacitance change : Within ±5% or ±0.5 pF, whichever is larger.
Appearance : No abnormality
Capacitance change : Within±0.5 pF
Appearance : No abnormality
: No abnormality
Standard
Temperature
Compensating(Class1)
Specified
Value
High Frequency Type
High Permittivity (Class2)
Capacitance change : Within ±12.5%
Multilayer Ceramic Capacitors
021, 042, 063, ※105 Type
The other types
Board
Glass epoxy-resin substrate
Test
Thickness
Warp
0.8mm
1.6mm
Methods and
Remarks
1mm
10 sec.
※105 Type thickness, C: 0.2mm ,P: 0.3mm.
Duration
Capacitance measurement shall be conducted
with the board bent
10. Body Strength
Standard
-
Temperature
Specified
Value
Compensating(Class1)
High Frequency Type No mechanical damage.
-
High Permittivity (Class2)
High Frequency 105Type
Applied force
Duraton
: 5N
Test
: 10 sec.
Methods and
Remarks
11. Adhesive Strength of Terminal Electrodes
Temperature
Standard
Specified
Compensating(Class1)
High Frequency Type No terminal separation or its indication.
Value
High Permittivity (Class2)
Multilayer Ceramic Capacitors
Test
021, 042, 063 Type
2N
105 Type or more
5N
Methods and
Remarks
Applied force
Duration
30±5 sec.
12. Solderability
Standard
High Frequency Type At least 95% of terminal electrode is covered by new solder.
Temperature
Specified
Value
Compensating(Class1)
High Permittivity (Class2)
Eutectic solder
H60A or H63A
230±5℃
Lead-free solder
Sn-3.0Ag-0.5Cu
245±3℃
Test
Solder type
Methods and
Remarks
Solder temperature
Duration
4±1 sec.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E09R01
13. Resistance to Soldering
Appearance
: No abnormality
Capacitance change
Q
: Within ±2.5% or ±0.25pF, whichever is larger.
: Initial value
Standard
Insulation resistance
Withstanding voltage
: Initial value
(between terminals) : No abnormality
Temperature
Compensating(Class1)
Appearance
: No abnormality
Capacitance change
Q
: Within ±2.5%
: Initial value
Specified
Value
High Frequency Type
Insulation resistance
Withstanding voltage
: Initial value
(between terminals) : No abnormality
Appearance
: No abnormality
Capacitance change
Dissipation factor
Insulation resistance
Withstanding voltage
: Within ±7.5%
High Permittivity (Class2) Note 1
: Initial value
: Initial value
(between terminals): No abnormality
Class 1
021, 042, 063 Type
150℃, 1 to 2 min.
105 Type
Preconditioning
Preheating
None
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5 min.
Solder temp.
Duration
270±5℃
3±0.5 sec.
Recovery
6 to 24 hrs (Standard condition) Note 5
Test
Methods and
Remarks
Class 2
021, 042、063 Type
150℃, 1 to 2 min.
105, 107, 212 Type
Thermal treatment (at 150℃ for 1 hr) Note 2
80 to 100℃, 2 to 5 min.
316, 325, 432 Type
Preconditioning
Preheating
80 to 100℃, 5 to 10 min.
150 to 200℃, 5 to 10 min.
150 to 200℃, 2 to 5 min.
270±5℃
Solder temp.
Duration
3±0.5 sec.
Recovery
24±2 hrs (Standard condition) Note 5
14. Temperature Cycle (Thermal Shock)
Appearance
: No abnormality
Capacitance change
Q
: Within ±2.5% or ±0.25pF, whichever is larger.
: Initial value
Standard
Insulation resistance
Withstanding voltage
: Initial value
(between terminals) : No abnormality
Temperature
Compensating(Class1)
Appearance
: No abnormality
Capacitance change
Q
: Within ±0.25pF
Specified
Value
High Frequency Type
: Initial value
Insulation resistance
Withstanding voltage
: Initial value
(between terminals) : No abnormality
Appearance
: No abnormality
Capacitance change
Dissipation factor
Insulation resistance
Withstanding voltage
: Within ±7.5%
High Permittivity (Class2) Note 1
: Initial value
: Initial value
(between terminals) : No abnormality
Class 1
None
Class 2
Thermal treatment (at 150℃ for 1 hr)
Note 2
Preconditioning
Step
Temperature(℃)
Time(min.)
30±3
Test
1
2
3
4
Minimum operating temperature
Normal temperature
Methods and
Remarks
1 cycle
2 to 3
Maximum operating temperature
Normal temperature
30±3
2 to 3
Number of cycles
Recovery
5 times
6 to 24 hrs (Standard condition) Note 5
24±2 hrs (Standard condition) Note 5
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E09R01
15. Humidity (Steady State)
Appearance
: No abnormality
Capacitance change
Q
: Within ±5% or ±0.5pF, whichever is larger.
: C<10pF : Q≧200+10C
Standard
10≦C<30pF : Q≧275+2.5C
C≧30pF:Q≧350(C:Nominal capacitance)
: 1000 MΩ min.
Temperature
Compensating(Class1)
Insulation resistance
Appearance
Specified
Value
: No abnormality
: Within ±0.5pF,
: 1000 MΩ min.
High Frequency Type Capacitance change
Insulation resistance
Appearance
: No abnormality
Capacitance change
: Within ±12.5%
High Permittivity (Class2) Note 1
Dissipation factor
: 5.0% max.
Insulation resistance
: 50 MΩμF or 1000 MΩ whichever is smaller.
Class 1
Class 2
All items
Standard
40±2℃
High Frequency Type
60±2℃
Preconditioning
Temperature
Humidity
None
Thermal treatment( at 150℃ for 1 hr) Note 2
40±2℃
Test
Methods and
Remarks
90 to 95%RH
90 to 95%RH
Duration
500+24/-0 hrs
500+24/-0 hrs
Recovery
6 to 24 hrs (Standard condition) Note 5
24±2 hrs (Standard condition) Note 5
16. Humidity Loading
Appearance
: No abnormality
Capacitance change
: Within ±7.5% or ±0.75pF, whichever is larger.
: C<30pF:Q≧100+10C/3
C≧30pF:Q≧200 (C:Nominal capacitance)
: 500 MΩ min.
Standard
Q
Insulation resistance
Temperature
Compensating(Class1)
Appearance
: No abnormality
Specified
Value
Capacitance change
: C≦2pF:Within ±0.4 pF
C>2pF:Within ±0.75 pF
(C:Nominal capacitance)
: 500 MΩ min.
High Frequency Type
Insulation resistance
Appearance
: No abnormality
Capacitance change
Dissipation factor
Insulation resistance
: Within ±12.5%
High Permittivity (Class2) Note 1
: 5.0% max.
: 25 MΩμF or 500 MΩ, whichever is smaller.
Class 1
Class 2
Standard
High Frequency Type
All items
Preconditioning
Voltage treatment
None
(Rated voltage are applied for 1 hour at 40℃) Note 3
Temperature
Humidity
40±2℃
60±2℃
40±2℃
Test
Methods and
Remarks
90 to 95%RH
500+24/-0 hrs
Rated voltage
90 to 95%RH
Duration
500+24/-0 hrs
Rated voltage
Applied voltage
Charge/discharge
current
50mA max.
50mA max.
Recovery
6 to 24 hrs (Standard condition) Note 5
24±2 hrs(Standard condition) Note 5
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E09R01
17. High Temperature Loading
Appearance
: No abnormality
Capacitance change
Q
: Within ±3% or ±0.3pF, whichever is larger.
: C<10pF: Q≧200+10C
Standard
10≦C<30pF:Q≧275+2.5C
C≧30pF: Q≧350(C:Nominal capacitance)
: 1000 MΩ min.
Temperature
Compensating(Class1)
Insulation resistance
Appearance
Specified
Value
: No abnormality
High Frequency Type Capacitance change
Insulation resistance
: Within ±3% or ±0.3pF, whichever is larger.
: 1000 MΩ min.
Appearance
: No abnormality
Capacitance change
: Within ±12.5%
High Permittivity (Class2) Note 1
Dissipation factor
: 5.0% max.
Insulation resistance
: 50 MΩμF or 1000 MΩ, whichever is smaller.
Class 1
High Frequency Type
Class 2
Standard
BJ, LD(※)
C6
B7, C7
Voltage treatment(Twice the rated voltage shall be applied for
1 hour at 85℃, 105℃ or 125℃) Note 3, 4
Maximum operating temperature
Preconditioning
None
Temperature
Duration
Maximum operating temperature
1000+48/-0 hrs
Test
1000+48/-0 hrs
Methods and
Remarks
Applied voltage
Charge/discharge
current
Rated voltage×2 Note 4
Rated voltage×2 Note 4
50mA max.
50mA max.
Recovery
6 to 24hr (Standard condition) Note 5
24±2 hrs (Standard condition) Note 5
Note: ※LD Low distortion high value multilayer ceramic capacitor
Note 1 The figures indicate typical specifications. Please refer to individual specifications in detail.
Note 2 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150+0/-10℃ for an hour and kept at room temperature for
24±2hours.
Note 3 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in
the test conditions, and kept at room temperature for 24±2hours.
Note 4 150% of rated voltage is applicable to some items. Please refer to their specifications for further information.
Note 5 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa When there are questions concerning
measurement results, in order to provide correlation data, the test shall be conducted under the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa Unless otherwise specified, all the tests are conducted under the
"standard condition".
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E09R01
Multilayer Ceramic Capacitors , Medium-High Voltage Multilayer Ceramic Capacitors and
High Reliability Application Multilayer Ceramic Capacitors are noted separately.
Super Low Distortion Multilayer Ceramic Capacitors
■RELIABILITY DATA
1. Operating Temperature Range
Specified Value
-55 to +125℃
2. Storage Temperature Range
Specified Value
-55 to +125℃
3. Rated Voltage
Specified Value
6.3VDC, 10VDC, 16VDC, 25VDC, 35VDC, 50VDC
4. Dielectric Withstanding Voltage (Between terminals)
Specified Value
No breakdown or damage
Applied voltage
Duration
: Rated voltage×3
: 1 to 5 sec.
Test Methods and
Remarks
Charge/discharge current
: 50mA max.
5.Insulation Resistance
Specified Value
10000 MΩ or 500MΩμF, whichever is smaller
Applied voltage
Duration
: Rated voltage
: 60±5 sec.
: 50mA max.
Test Methods and
Remarks
Charge/discharge current
6.Capacitance (Tolerance)
Specified Value
±10%
Measuring frequency
Measuring voltage
Bias application
: 1kHz±10%
: 1±0.2Vrms
: None
Test Methods and
Remarks
7.Dissipation Factor
Specified Value
0.1%max
Measuring frequency
Measuring voltage
Bias application
: 1kHz±10%
: 1±0.2Vrms
: None
Test Methods and
Remarks
8.Bending Strength
Specified Value
Appearance
: No abnormality
: ±5%
Capacitance change
Warp
: 1mm
: 0.5mm/second
Speed
Duration
Test board
Thickness
: 10 seconds
: glass epoxy resin substrate
: 1.6mm
Test Methods and
Remarks
Capacitance measurement shall be conducted with the board bent.
9.Adhesive Force of Terminal Electrodes
Specified Value
Terminal electrodes shall be no exfoliation or a sign of exfoliation.
Test Methods and Applied force
: 5N
Remarks
Duration
: 30 ±5 seconds
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_CFcap_reli_e-E09R01
10.Solderability
Specified Value
At least 95% of terminal electrode is covered by new solder.
Eutectic solder
Lead-free solder
Sn-3.0Ag-0.5Cu
245±3℃
Solder type
H60A or H63A
230±5℃
Test Methods and
Remarks
Solder temperature
Duration
4±1 sec.
11.Resistance to Soldering Heat
Appearance
: No abnormality
Capacitance change
: ±2.5% max.
: Initial value
: Initial value
Specified Value
Dissipation factor
Insulation resistance
Withstanding voltage
(between terminals) : No abnormality
Solder temp.
: 270 ±5℃
Duration
: 3 ±0.5 sec.
Test Methods and
Remarks
Preheating conditions
: 80 to 100℃, 2 to 5 min. or 5 to 10 min.
150 to 200℃, 2 to 5 min. or 5 to 10 min.
: 24±2hrs under the standard condition Note1
Measurement shall be conducted
12.Temperature Cycle (Thermal Shock)
Appearance
: No abnormality
Capacitance change
: ±2.5% max
Specified Value
Dissipation factor
: Initial value
Insulation resistance
Withstanding voltage
: Initial value
(between terminals): No abnormality
Conditions for 1 cycle
Step
temperature(℃)
Minimum operating temperature
Normal temperature
Time(min.)
30±3 min.
2 to 3 min.
30±3 min.
2 to 3 min.
1
2
3
4
Test Methods and
Remarks
Maximum operating temperature
Normal temperature
Number of cycles: 5 times
Measurement shall be conducted : 24±2hrs under the standard condition Note1
13.Humidity (Steady state)
Appearance
: No abnormality
Capacitance change
Dissipation factor
: ±5% max
Specified Value
: 0.5% max
Insulation resistance
: 50MΩμF or 1000MΩ, whichever is smaller
Temperature
: 40±2℃
Test Methods and Humidity
: 90 to 95% RH
: 500 +24/-0 hrs
Remarks
Duration
Measurement shall be conducted
: 24 ±2hrs under the standard condition Note1
14.Humidity Loading
Specified Value
Appearance
: No abnormality
: ±7.5% max
Capacitance change
Dissipation factor
Insulation resistance
: 0.5% max
: 25MΩμF or 500MΩ, whichever is smaller
According to JIS C 5101-1.
Temperature
: 40±2℃
Test Methods and Humidity
: 90 to 95% RH
: 500 +24/-0 hrs
: Rated voltage
: 50mA max
Remarks
Duration
Applied voltage
Charge/discharge current
Measurement shall be conducted
: 24 ±2hrs under the standard condition Note1
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_CFcap_reli_e-E09R01
15.High Temperature Loading
Appearance
: No abnormality
Capacitance change
: ±3% max
Specified Value
Dissipation factor
: 0.35% max
Insulation resistance
: 50MΩμF or 1000MΩ, whichever is smaller
According to JIS C 5101-1.
Temperature
: Maximum operating temperature
: 1000 +48/-0 hrs
: Rated voltage x 2
Test Methods and
Remarks
Duration
Applied voltage
Charge/discharge current
: 50mA max
Measurement shall be conducted
: 24 ±2hrs under the standard condition Note1
Note1 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_CFcap_reli_e-E09R01
Multilayer Ceramic Capacitors , Super Low Distortion Multilayer Ceramic Capacitors and
High Reliability Application Multilayer Ceramic Capacitors are noted separately.
Medium-High Voltage Multilayer Ceramic Capacitor
■RELIABILITY DATA
1. Operating Temperature Range
Temperature Compensating(Class1)
CG
: -55 to +125℃
X7R, X7S : -55 to +125℃
Specified Value
X5R
B
: -55 to +85℃
: -25 to +85℃
: -55 to +125℃
High Permittivity (Class2)
SD
2. Storage Temperature Range
Temperature Compensating(Class1)
CG
: -55 to +125℃
X7R, X7S : -55 to +125℃
Specified Value
X5R
B
: -55 to +85℃
: -25 to +85℃
: -55 to +125℃
High Permittivity (Class2)
SD
3. Rated Voltage
Specified Value
Temperature Compensating(Class1)
High Permittivity (Class2)
100VDC(HMK)
100VDC(HMK), 250VDC(QMK), 630VDC(SMK), 2000VDC(XMK)
4. Withstanding Voltage(Between terminals)
Specified Value
No breakdown or damage
Applied voltage
Duration
: Rated voltage×2.5(HMK), Rated voltage×2(QMK), Rated voltage×1.2(SMK)(XMK)
Test Methods and
Remarks
: 1 to 5sec.
: 50mA max.
Charge/discharge current
5. Insulation Resistance
Specified Value
Temperature Compensating(Class1)
10000 MΩ min.
High Permittivity (Class2)
100MΩ・μF or 10GΩ, whichever is smaller.
Applied voltage
Duration
: Rated voltage(HMK, QMK), 500V(SMK,XMK)
Test Methods and
Remarks
: 60±5sec.
: 50mA max.
Charge/discharge current
6. Capacitance (Tolerance)
0.2pF≦C≦5pF
0.2pF≦C≦10pF
C>10pF
: ±0.25pF
Temperature Compensating(Class1)
: ±0.5pF
Specified Value
: ±5% or ±10%
High Permittivity (Class2)
±10%, ±20%
Measuring frequency
Measuring voltage
Bias application
: 1MHz±10%
: 0.5~5Vrms
: None
Temperature Compensating(Class1)
High Permittivity (Class2)
Test Methods and
Remarks
Measuring frequency
Measuring voltage
Bias application
: 1kHz±10%
: 1±0.2Vrms
: None
7. Q or Dissipation Factor
C<30pF : Q≧400+20C
C≧30pF : Q≧1000
Temperature Compensating(Class1)
(C:Nominal capacitance)
Specified Value
High Permittivity (Class2)
3.5%max(HMK),2.5%max(QMK, SMK)
Measuring frequency
Measuring voltage
Bias application
: 1MHz±10%
Temperature Compensating(Class1)
: 0.5~5Vrms
: None
Test Methods and
Remarks
Measuring frequency
Measuring voltage
Bias application
: 1kHz±10%
: 1±0.2Vrms
: None
High Permittivity (Class2)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_mhv_reli_e-E09R01
8. Temperature Characteristic of Capacitance
Temperature Compensating(Class1)
CG
:0±30ppm/℃(-55 to +125℃)
B
: ±10%(-25 to +85℃)
: ±15%(-55 to +85℃)
: ±15%(-55 to +125℃
: ±22%(-55 to +125℃)
X5R
X7R
X7S
SD
Specified Value
High Permittivity (Class2)
Class 1
:
-
(-55 to +125℃)
Capacitance at 20℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the
following equation.
(C85-C20)
×106(ppm/℃)
C20×△T
△T=65
Class 2
Capacitance at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the
following equation.
Test Methods and
Remarks
Step
B
X5R、X7R、X6S、X7S
Minimum operating temperature
1
2
3
20℃
25℃
Maximum operating temperature
(C-C2)
C2
×100(%)
C
: Capacitance value in Step 1 or Step 3
C2 : Capacitance value in Step 2
9. Deflection
Appearance
: No abnormality
Temperature Compensating(Class1)
High Permittivity (Class2)
Capacitance change : Within ±5% or ±0.5 pF, whichever is larger.
Specified Value
Appearance
: No abnormality
: Within±10%
Capacitance change
Warp
: 1mm
Duration
Test board
Thickness
: 10sec.
: Glass epoxy-resin substrate
: 1.6mm
Test Methods and
Remarks
Capacitance measurement shall be conducted with the board bent.
10. Adhesive Strength of Terminal Electrodes
Temperature Compensating(Class1)
High Permittivity (Class2)
Specified Value
No terminal separation or its indication.
Test Methods and Applied force
: 5N
Remarks
Duration
: 30±5sec.
11. Solderability
Specified Value
Temperature Compensating(Class1)
High Permittivity (Class2)
At least 95% of terminal electrode is covered by new solder
Eutectic solder
Lead-free solder
Sn-3.0Ag-0.5Cu
245±3℃
Solder type
H60A or H63A
230±5℃
Test Methods and
Remarks
Solder temperature
Duration
4±1 sec.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_mhv_reli_e-E09R01
12. Resistance to Soldering
Appearance
: No abnormality
Capacitance change
Q
: Within ±2.5% or ±0.25pF, whichever is larger.(HMK)
: Initial value
Temperature Compensating(Class1)
Insulation resistance
Withstanding voltage
: Initial value
(between terminals) : No abnormality
Specified Value
Appearance
: No abnormality
Capacitance change
Dissipation facto
Insulation resistance
Withstanding voltage
: Within±15%(HMK), ±10%(QMK, SMK,XMK)
: Initial value
High Permittivity (Class2)
: Initial value
(between terminals) : No abnormality
Temperature Compensating(Class1)
Preconditioning
Solder temperature
Duration
None
270±5℃
3±0.5sec.
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5min.
24±2hrs under the standard condition Note3
Preheating conditions
Recovery
Test Methods and
Remarks
High Permittivity (Class2)
Thermal treatment(at 150℃ for 1hr) Note1
270±5℃
Preconditioning
Solder temperature
Duration
3±0.5sec.
80 to 100℃, 2 to 5 min.
Preheating conditions
Recovery
150 to 200℃, 2 to 5min.
24±2hrs under the standard condition Note3
13. Temperature Cycle (Thermal Shock)
Appearance
: No abnormality
Capacitance change
: Within ±2.5% or ±0.25pF, whichever is larger.(HMK)
: Initial value
Temperature Compensating(Class1)
Q
Insulation resistance
Withstanding voltage
: Initial value
(between terminals) : No abnormality
Specified Value
Appearance
: No abnormality
Capacitance change
Dissipation facto
Insulation resistance
Withstanding voltage
: Within±15%(HMK), ±10%(QMK, SMK ,XMK)
: Initial value
High Permittivity (Class2)
: Initial value
(between terminals) : No abnormality
Class 1
None
Class 2
Preconditioning
1 cycle
Thermal treatment (at 150℃ for 1 hr) Note 1
Step
Temperature(℃)
Time(min.)
30±3
1
2
3
4
Minimum operating temperature
Normal temperature
Test Methods and
Remarks
2 to 3
Maximum operating temperature
Normal temperature
30±3
2 to 3
Number of cycles
Recovery
5 times
6 to 24 hrs (Standard condition) Note 3
24±2 hrs (Standard condition) Note 3
14. Humidity (Steady state)
Appearance
: No abnormality
Capacitance change
Q
: Within ±5% or ±0.5pF, whichever is larger.(HMK)
: C<10pF : Q≧200+10C
Temperature Compensating(Class1)
10≦C<30pF : Q≧275+2.5C
C≧30pF:Q≧350(C:Nominal capacitance)
: 1000 MΩ min.
Specified Value
Insulation resistance
Appearance
: No abnormality
Capacitance change
Dissipation factor
Insulation resistance
: Within±15%
: 7%max(HMK), 5%max(QMK, SMK, XMK).
: 25MΩμF or 1000MΩ, whichever is smaller.
High Permittivity (Class2)
Class 1
None
Class 2
Thermal treatment( at 150℃ for 1 hr) Note 1
40±2℃
Preconditioning
Temperature
Humidity
40±2℃
Test Methods and
Remarks
90 to 95%RH
500+24/-0 hrs
90 to 95%RH
Duration
500+24/-0 hrs
Recovery
6 to 24 hrs (Standard condition) Note 3
24±2 hrs (Standard condition) Note 3
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_mhv_reli_e-E09R01
15. Humidity Loading
Specified Value
Appearance
: No abnormality
Capacitance change
Q
: Within ±7.5% or ±0.75pF, whichever is larger (HMK).
: C<30pF:Q≧100+10C/3
Temperature Compensating(Class1)
High Permittivity (Class2)
C≧30pF:Q≧200 (C:Nominal capacitance)
: 500 MΩ min.
Insulation resistance
Appearance
: No abnormality
Capacitance change
Dissipation factor
Insulation resistance
: Within±15%
: 7%max(HMK), 5%max(QMK, SMK, XMK).
: 10MΩμF or 500MΩ, whichever is smaller.
According to JIS 5101-1.
Preconditioning
Class 1
Class 2
Voltage treatment
None
(Rated voltage are applied for 1 hour at 40℃) Note 2
Temperature
Humidity
40±2℃
40±2℃
Test Methods and
Remarks
90 to 95%RH
90 to 95%RH
Duration
500+24/-0 hrs
Rated voltage
500+24/-0 hrs
Rated voltage
Applied voltage
Charge/discharge
current
50mA max.
50mA max.
Recovery
6 to 24 hrs (Standard condition) Note 3
24±2 hrs(Standard condition) Note 3
16. High Temperature Loading
Appearance
: No abnormality
Capacitance change
: Within ±7.5% or ±0.75pF, whichever is larger.(HMK)
: C<30pF:Q≧100+10C/3
Temperature Compensating(Class1)
Q
C≧30pF:Q≧200 (C:Nominal capacitance)
: 500 MΩ min.
Insulation resistance
Specified Value
Appearance
: No abnormality
Capacitance change
Dissipation factor
Insulation resistance
: Within±15%
High Permittivity (Class2)
: 7%max(HMK), 5%max(QMK, SMK, XMK).
: 50MΩμF or 1000MΩ, whichever is smaller.
According to JIS 5101-1.
Class 1
None
Class 2
Voltage treatment Note 2
Preconditioning
Temperature
Duration
Maximum operating temperature
1000+48/-0 hrs
Maximum operating temperature
1000+48/-0 hrs
Test Methods and
Remarks
Rated voltage×2(HMK), Rated voltage×1.5(QMK),
Rated voltage×1.2(SMK,XMK)
Applied voltage
Rated voltage×2(HMK)
50mA max.
Charge/discharge
current
50mA max.
Recovery
6 to 24hr (Standard condition) Note 3
24±2 hrs (Standard condition) Note 3
Note1 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150+0/-10℃ for an hour and kept at
for 24±2hours.
room temperature
Note2 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in the
test conditions, and kept at room temperature for 24±2hours.
Note3 Standard condition : Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under
the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_mhv_reli_e-E09R01
High Reliability Application Multilayer Ceramic Capacitors are noted separately.
Precautions on the use of Multilayer Ceramic Capacitors
■PRECAUTIONS
1. Circuit Design
◆Verification of operating environment, electrical rating and performance
1. A malfunction of equipment in fields such as medical, aerospace, nuclear control, etc. may cause serious harm to human life or have
severe social ramifications.
Therefore, any capacitors to be used in such equipment may require higher safety and reliability, and shall be clearly differentiated from
them used in general purpose applications.
Precautions
◆Operating Voltage (Verification of Rated voltage)
1. The operating voltage for capacitors must always be their rated voltage or less.
If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages shall be the rated voltage or less.
For a circuit where an AC or a pulse voltage may be used, the sum of their peak voltages shall also be the rated voltage or less.
2. Even if an applied voltage is the rated voltage or less reliability of capacitors may be deteriorated in case that either a high frequency AC
voltage or a pulse voltage having rapid rise time is used in a circuit.
2. PCB Design
◆Pattern configurations (Design of Land-patterns)
1. When capacitors are mounted on PCBs, the amount of solder used (size of fillet) can directly affect the capacitor performance.
Therefore, the following items must be carefully considered in the design of land patterns:
(1)Excessive solder applied can cause mechanical stresses which lead to chip breaking or cracking. Therefore, please consider
appropriate land-patterns for proper amount of solder.
Precautions
(2)When more than one component are jointly soldered onto the same land, each component's soldering point shall be separated by
solder-resist.
◆Pattern configurations (Capacitor layout on PCBs)
After capacitors are mounted on boards, they can be subjected to mechanical stresses in subsequent manufacturing processes (PCB
cutting, board inspection, mounting of additional parts, assembly into the chassis, wave soldering of the boards, etc.). For this reason, land
pattern configurations and positions of capacitors shall be carefully considered to minimize stresses.
◆Pattern configurations (Design of Land-patterns)
The following diagrams and tables show some examples of recommended land patterns to prevent excessive solder amounts.
(1)Recommended land dimensions for typical chip capacitors
●Multilayer Ceramic Capacitors : Recommended land dimensions
Land patterns for PCBs
Land pattern
(unit: mm)
Solder-resist
Wave-soldering
Chip capacitor
Type
107
1.6
212
2.0
316
3.2
325
3.2
L
C
Size
W
0.8
1.25
1.6
2.5
A
B
C
0.8 to 1.0
0.5 to 0.8
0.6 to 0.8
1.0 to 1.4
0.8 to 1.5
0.9 to 1.2
1.8 to 2.5
0.8 to 1.7
1.2 to 1.6
1.8 to 2.5
0.8 to 1.7
1.8 to 2.5
B
A
B
Chip capacitor
W
L
Technical
Reflow-soldering
Type 021
considerations
042
0.4
0.2
063
0.6
0.3
105
1.0
0.5
107
1.6
212
2.0
316
3.2
325
3.2
432
4.5
3.2
L
0.25
Size
W
0.125
0.8
1.25
1.6
2.5
A
B
C
0.095~0.135 0.15~0.25 0.20~0.30 0.45~0.55
0.085~0.125 0.10~0.20 0.20~0.30 0.40~0.50
0.110~0.150 0.15~0.30 0.25~0.40 0.45~0.55
0.6~0.8
0.6~0.8
0.6~0.8
0.8~1.2
0.8~1.2
0.9~1.6
1.8~2.5
1.0~1.5
1.2~2.0
1.8~2.5
1.0~1.5
1.8~3.2
2.5~3.5
1.5~1.8
2.3~3.5
Note:Recommended land size might be different according to the allowance of the size of the product.
LWDC
●LWDC: Recommended land dimensions for reflow-soldering
(unit: mm)
Type
105
0.52
107
0.8
212
1.25
L
W
Size
W
1.0
1.6
2.0
A
B
C
0.18~0.22
0.2~0.25
0.9~1.1
0.25~0.3
0.3~0.4
1.5~1.7
0.5~0.7
0.4~0.5
1.9~2.1
L
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E08R01
(2)Examples of good and bad solder application
Item
Not recommended
Recommended
Solder-resist
Lead wire of component
Mixed mounting of SMD and
leaded components
Chassis
Solder-resist
Solder (for grounding)
Component placement close to
the chassis
Electrode pattern
Lead wire of component
Soldering iron
Solder-resist
Hand-soldering of leaded
components near mounted
components
Solder-resist
Horizontal component
placement
◆Pattern configurations (Capacitor layout on PCBs)
1-1. The following is examples of good and bad capacitor layouts ; capacitors shall be located to minimize any
stresses from board warp or deflection.
possible mechanical
Items
Not recommended
Recommended
Place the product at a right
angle to the direction of the
anticipated mechanical
stress.
Deflection of board
1-2. The amount of mechanical stresses given will vary depending on capacitor layout. Please refer to diagram below.
E
D
Perforation
C
A
B
Slit
Magnitude of stress A>B=C>D>E
1-3. When PCB is split, the amount of mechanical stress on the capacitors can vary according to the method used. The following methods
are listed in order from least stressful to most stressful: push-back, slit, V-grooving, and perforation. Thus, please consider the PCB,
split methods as well as chip location.
3. Mounting
Precautions
◆Adjustment of mounting machine
1. When capacitors are mounted on PCB, excessive impact load shall not be imposed on them.
2. Maintenance and inspection of mounting machines shall be conducted periodically.
◆Selection of Adhesives
1. When chips are attached on PCBs with adhesives prior to soldering, it may cause capacitor characteristics degradation unless the
following factors are appropriately checked : size of land patterns, type of adhesive, amount applied, hardening temperature and
hardening period. Therefore, please contact us for further information.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E08R01
◆Adjustment of mounting machine
1. When the bottom dead center of a pick-up nozzle is too low, excessive force is imposed on capacitors and causes damages. To avoid
this, the following points shall be considerable.
(1)The bottom dead center of the pick-up nozzle shall be adjusted to the surface level of PCB without the board deflection.
(2)The pressure of nozzle shall be adjusted between 1 and 3 N static loads.
(3)To reduce the amount of deflection of the board caused by impact of the pick-up nozzle, supporting pins or back-up pins shall be
used on the other side of the PCB. The following diagrams show some typical examples of good and bad pick-up nozzle
placement:
Item
Improper method
Proper method
chipping
or cracking
Single-sided mounting
supporting pins
or back-up pins
Double-sided mounting
chipping
or cracking
supporting pins
or back-up pins
2. As the alignment pin is worn out, adjustment of the nozzle height can cause chipping or cracking of capacitors because of mechanical
impact on the capacitors.
Technical
considerations
To avoid this, the monitoring of the width between the alignment pins in the stopped position, maintenance, check and replacement of
the pin shall be conducted periodically.
◆Selection of Adhesives
Some adhesives may cause IR deterioration. The different shrinkage percentage of between the adhesive and the capacitors may result in
stresses on the capacitors and lead to cracking. Moreover, too little or too much adhesive applied to the board may adversely affect
components. Therefore, the following precautions shall be noted in the application of adhesives.
(1)Required adhesive characteristics
a. The adhesive shall be strong enough to hold parts on the board during the mounting & solder process.
b. The adhesive shall have sufficient strength at high temperatures.
c. The adhesive shall have good coating and thickness consistency.
d. The adhesive shall be used during its prescribed shelf life.
e. The adhesive shall harden rapidly.
f. The adhesive shall have corrosion resistance.
g. The adhesive shall have excellent insulation characteristics.
h. The adhesive shall have no emission of toxic gasses and no effect on the human body.
(2)The recommended amount of adhesives is as follows;
[Recommended condition]
Amount adhesive
After capacitor are bonded
a
a
Figure
212/316 case sizes as examples
a
b
c
0.3mm min
100 to 120μm
b
Adhesives shall not contact land
c
c
4. Soldering
◆Selection of Flux
Since flux may have a significant effect on the performance of capacitors, it is necessary to verify the following conditions prior to use;
(1)Flux used shall be less than or equal to 0.1 wt%( in Cl equivalent) of halogenated content. Flux having a strong acidity content shall
not be applied.
(2)When shall capacitors are soldered on boards, the amount of flux applied shall be controlled at the optimum level.
(3)When water-soluble flux is used, special care shall be taken to properly clean the boards.
Precautions
◆Soldering
Temperature, time, amount of solder, etc. shall be set in accordance with their recommended conditions.
Sn-Zn solder paste can adversely affect MLCC reliability.
Please contact us prior to usage of Sn-Zn solder.
◆Selection of Flux
1-1. When too much halogenated substance(Chlorine, etc.) content is used to activate flux, or highly acidic flux is used, it may lead to
corrosion of terminal electrodes or degradation of insulation resistance on the surfaces of the capacitors.
1-2. Flux is used to increase solderability in wave soldering. However if too much flux is applied, a large amount of flux gas may be emitted
and may adversely affect the solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system.
1-3. Since the residue of water-soluble flux is easily dissolved in moisture in the air, the residues on the surfaces of capacitors in high
humidity conditions may cause a degradation of insulation resistance and reliability of the capacitors. Therefore, the cleaning
methods and the capability of the machines used shall also be considered carefully when water-soluble flux is used.
Technical
considerations
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E08R01
◆Soldering
・ Ceramic chip capacitors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling.
・ Therefore, the soldering must be conducted with great care so as to prevent malfunction of the components due to excessive thermal
shock.
・ Preheating : Capacitors shall be preheated sufficiently, and the temperature difference between the capacitors and solder shall be within
130℃.
・ Cooling : The temperature difference between the capacitors and cleaning process shall not be greater than 100℃.
[Reflow soldering]
【Recommended conditions for eutectic
【Recommended condition for Pb-free
soldering】
soldering】
300
300
Peak
260℃ Max.
Within 10sec.
Preheating
230℃
Within 10sec.
60sec. 60sec
Min.
Min.
200
100
0
200
Slow
Slow cooling
cooling
100
Heating above
230℃
Preheating150℃
60sec. Min.
40sec. Max.
0
1/2T~1/3T
Capacitor
PC board
Caution
Solder
T
①The ideal condition is to have solder mass(fillet)controlled to 1/2 to 1/3 of the
thickness of a capacitor.
②Because excessive dwell times can adversely affect solderability, soldering duration shall
be kept as close to recommended times as possible. soldering for 2 times.
[Wave soldering]
【Recommended conditions for eutectic
【Recommended condition for Pb-free
soldering】
300
soldering】
300
Peak
230~250℃
Within 3sec.
260℃ Max.
Within 10sec.
Preheating
120sec. Min.
120sec. Min.
200
200
100
0
Slow
Slow cooling
Preheating
150℃
cooling
100
0
Caution
①Wave soldering must not be applied to capacitors designated as for reflow soldering only. soldering for 1 times.
[Hand soldering]
【Recommended conditions for eutectic
【Recommended condition for Pb-free
soldering】
400
soldering】
400
400
300
200
100
0
Peak
Peak
280℃ Max.
Within 3sec.
230~280℃
Within 3sec.
350℃ Max.
Within 3sec.
300
300
⊿T
Slow cooling
200
Slow cooling
⊿T
200
Slow cooling
Preheating
150℃ Min.
Preheating
150℃ Min.
100
100
Preheating
60sec. Min.
0
60sec. Min.
60sec. Min.
0
⊿T
⊿T
316type or less
⊿T≦150℃
325type or more
⊿T≦130℃
Caution
①Use a 50W soldering iron with a maximum tip diameter of 1.0 mm.
②The soldering iron shall not directly touch capacitors. soldering for 1 times.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E08R01
5. Cleaning
Precautions
◆Cleaning conditions
1. When PCBs are cleaned after capacitors mounting, please select the appropriate cleaning solution in accordance with the intended use
of the cleaning. (e.g. to remove soldering flux or other materials from the production process.)
2. Cleaning condition shall be determined after it is verified by using actual cleaning machine that the cleaning process does not affect
capacitor's characteristics.
1. The use of inappropriate cleaning solutions can cause foreign substances such as flux residue to adhere to capacitors or deteriorate
their outer coating, resulting in a degradation of the capacitor's electrical properties (especially insulation resistance).
2. Inappropriate cleaning conditions( insufficient or excessive cleaning) may adversely affect the performance of the capacitors.
In the case of ultrasonic cleaning, too much power output can cause excessive vibration of PCBs which may lead to the cracking of
capacitors or the soldered portion, or decrease the terminal electrodes' strength. Therefore, the following conditions shall be carefully
checked;
Technical
considerations
Ultrasonic output :
20 W/ℓ or les
Ultrasonic frequency :
40 kHz or less
Ultrasonic washing period : 5 min. or less
6. Resin coating and mold
1. With some type of resins, decomposition gas or chemical reaction vapor may remain inside the resin during the hardening period or while
left under normal storage conditions resulting in the deterioration of the capacitor's performance.
2. When a resin's hardening temperature is higher than capacitor's operating temperature, the stresses generated by the excessive heat
may lead to damage or destruction of capacitors.
Precautions
The use of such resins, molding materials etc. is not recommended.
7. Handling
◆Splitting of PCB
1. When PCBs are split after components mounting, care shall be taken so as not to give any stresses of deflection or twisting to the board.
2. Board separation shall not be done manually, but by using the appropriate devices.
◆Mechanical considerations
Precautions
Be careful not to subject capacitors to excessive mechanical shocks.
(1)If ceramic capacitors are dropped onto a floor or a hard surface, they shall not be used.
(2)Please be careful that the mounted components do not come in contact with or bump against other boards or components.
8. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep packaging materials in good condition, care must be taken to control
temperature and humidity in the storage area. Humidity should especially be kept as low as possible.
・Recommended conditions
Ambient temperature : Below 30℃
Humidity : Below 70% RH
Precautions
The ambient temperature must be kept below 40℃. Even under ideal storage conditions, solderability of capacitor is deteriorated as
time passes, so capacitors shall be used within 6 months from the time of delivery.
・Ceramic chip capacitors shall be kept where no chlorine or sulfur exists in the air.
2. The capacitance values of high dielectric constant capacitors will gradually decrease with the passage of time, so care shall be taken to
design circuits. Even if capacitance value decreases as time passes, it will get back to the initial value by a heat treatment at 150℃ for
1hour.
If capacitors are stored in a high temperature and humidity environment, it might rapidly cause poor solderability due to terminal oxidation and
quality loss of taping/packaging materials. For this reason, capacitors shall be used within 6 months from the time of delivery. If exceeding the
above period, please check solderability before using the capacitors.
Technical
considerations
※RCR-2335B(Safety Application Guide for fixed ceramic capacitors for use in electronic equipment)is published by JEITA.
Please check the guide regarding precautions for deflection test, soldering by spot heat, and so on.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E08R01
相关型号:
LMK212ABJ475MG8T
MLCC (High dielectric type) for Telecommunications infrastructure and Industrial equipment / Medical devices
TAIYO YUDEN
LMK212ABJ475MGHT
Capacitor, Ceramic, Chip, General Purpose, 4.7uF, 10V, ±20%, X5R, 0805 (2012 mm), 0.098"T, -55º ~ +85ºC, 7" Reel/4mm pitch
TAIYO YUDEN
LMK212B7105KD-T
Capacitor, Ceramic, Chip, General Purpose, 1uF, 10V, ±10%, X7R, 0805 (2012 mm), 0.008"T, -55º ~ +125ºC, 7" Reel/4mm pitch
TAIYO YUDEN
LMK212B7105KG
Ceramic Capacitor, Multilayer, Ceramic, 10V, 10% +Tol, 10% -Tol, X7R, 15% TC, 1uF, Surface Mount, 0805, CHIP
TAIYO YUDEN
LMK212B7105MD-T
Capacitor, Ceramic, Chip, General Purpose, 1uF, 10V, ±20%, X7R, 0805 (2012 mm), 0.008"T, -55º ~ +125ºC, 7" Reel/4mm pitch
TAIYO YUDEN
©2020 ICPDF网 联系我们和版权申明